Duplo DF-990 Скачать руководство пользователя

Страница: 83 / 100

Chapter 4 Using the DF HAND FEED KIT

Insert a sheet of paper to perform test

folding.

Insert paper into the inlet, and the machine

will start feeding operation automatically to

process folding.

Compress the paper inside the machine to

insert paper into the inlet. If the paper is

not compressed enough, paper jam may

occur. If so, press the

key to eject

paper forcibly.

Check the finish of test folding.

Adjust the folding misalignment as required.

Select the method of using the counter. (Count Up and Count Down)

Chapter 2 “3. Standard Folding of Standard Paper” (p.36)

Insert paper to start folding operation.

• Do not insert the next paper before the machine stops. If the next paper is inserted before

the machine stops, [Jam Feed Sec] is displayed on the LCD touch panel, and the machine

stops.
When an error is displayed, press the

key to force ejection.

• When removing paper from the inlet after the machine starts paper feeding operation, it is

determined that paper is fed inside the machine, [Jam Conveyance Sec] is displayed on the

LCD touch panel, and the machine stops.
If so, cancel the error by taking either of the following measures. Press the

key to force

ejection.

5. Correcting Folding Misalignment

Do not put fingers inside during operation.

Keep away long hair, ties, jewelry and loose clothing.

It could cause injury.

5-1. Adjustment folding misalignment in up and down direction

Chapter 3 “1-2. Adjustment folding misalignment in up and down direction” (p.43)

Содержание DF-990





































































































Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды

Duplo DF-990, Инструкция по эксплуатации

Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды