Duplo DF-990 Скачать руководство пользователя

Страница: 50 / 100

Chapter 3 Advanced Operation

1-3. Deformed folding

The paper may not be folded properly due to the characteristics of paper. In such cases, check the following

points.

• Do not use paper outside the specifications.

Particularly, deformed folding occurs

frequently in the use of thin, flimsy paper not

appropriate.

• Lower the processing speed when deformed

folding occurs for thin and flimsy paper.

“8-2. Thin paper mode” (p.61)

• Separate paper well prior to stacking.

Chapter 1 “8-1. Paper used” (p.30)

• Stack paper on the paper feed tray after aligning well, and set the paper feed guides at the correct

positions. Also tighten the fixing screws of the paper feed guides firmly.

Chapter 2 “2-2. Stacking paper” (p.34)

2. Standard Folding of Non-Standard Paper

Standard folding of non-standard paper is a method to perform paper folding by saving paper lengths other

than standard paper and selecting the folding mode of standard folding.

Paper other than the six standard paper is called non-standard paper. (The A6, A7, or B7 paper can be used

as non-standard paper.) (five standard paper sizes For NA)
The foldable sizes are as follows. (width x length)

Length : 105.0 to 457.2 mm/

4.13 to 18.00 inches

Width :

74 to 311 mm/

2.91 to 12.24 inches

Paper feed

direction

Paper

Maximum : 311 x 457.2 mm/12.24 x 18.00 inches
Minimum :74 x 105.0 mm/2.91 x 4.13 inches

Depending on the paper length, the following

folding modes are limited.

Double fold, irregular accordion fold-out:

182.0 to 457.2 mm/7.17 to 18.00 inches

Letter fold, Accordion-fold:

141.0 to 457.2 mm/5.55 to 18.00 inches

Gate fold:

128.0 to 432.0 mm/5.04 to 17.00 inches

•

Standard paper which is stacked on the paper feed tray in the long edge feeding direction is

considered non-standard paper.

•

The paper sizes which can be used may vary with the paper type, thickness, and printing

state.

Example: When performing letter fold on 300.0 mm length paper

Touch the

key on the [Ready] screen —> Touch [Standard Fold for Non-Standard

Size].

Using the numeric keypad, enter the paper length [300] —> Touch the

key.

Содержание DF-990





































































































Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды

Duplo DF-990, Инструкция по эксплуатации

Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды