47
Chapter 3 Advanced Operation
Copyright © 2019 Duplo Corporation All Rights Reserved
3
Touch the
key.
Return to the [Ready] screen.
3. Custom Folding
<Standard single fold>
<Example of custom single fold>
• Custom folding is an operation method to fold
paper at any position by specifying the folding
stopper positions (folding position) of the
folding plates 1 and 2.
• The foldable sizes are as follows.
(width x length)
Maximum: 311 x 457.2 mm/12.24 x 18.00
inches
Minimum: 74 x 105.0 mm/2.91 x 4.13 inches
The paper sizes which can be used may vary with the paper type, thickness, and printing state.
Length of
folded plane
• The length of the folded plane (see figure
to the right) which can be folded by folding
plates 1 and 2 is restricted.
Folding plate 1: 42.0 to 325.0 mm/1.65 to
12.80 inches
Folding plate 2: 0.0 (*)/47.0 to 217.0 mm
/0.0 (*)/1.85 to 8.54 inches
(*) As folding plate 2 is not used in single
folding, it is 0 mm/0 inches.
Incorrectly measuring the paper length or setting the folding stopper position can cause paper
jamming inside the folding plate.
3-1. Operation
As an example of accordion-fold, operation procedures for custom folding are described with the following
setting.
A
B
Paper feed
direction
Paper size: A4 (210 x 297.0 mm/8.27 x 11.69 inches)
Fold1: 85.0 mm/3.35 inches (length A)
Fold2: 95.0 mm/3.74 inches (length B)
1
Prepare a folding sample manually
using the paper to be folded.
2
Measure the length of the folding
position of the sample.
