Duplo DF-990 Скачать руководство пользователя

Страница: 12 / 100

Chapter 1 Before Operation

2-4. Connecting power cord

Install the power cord to the machine.

Otherwise electric hazards

may occur.

Do not touch the power

plug with wet hands.

Connect the power plug to the outlet.

2-5. Checking operations

• Use the paper to be used actually when checking operations.
• The folding position may be subtly different when using the machine with the settings at the shipment

unchanged under the influence of the thickness and stiffness of paper to be used. The folding position

may also be subtly different as the characteristics of paper may vary depending on the purchase season

even if the paper of the same size is purchased.

For checking operations, refer to “Chapter 2 Basic Operation” (p.33).

3. Names and Functions of Components

3-1. External parts

[5]

[7]

[6]

[4]

[10]

[9]

[2]

[3]

[8]

[1]

No.

Name

Function

[1]

Control panel

Use this panel to enter information to operate the machine.

[2]

Power switch

Chapter 2 “1. Turning On/Off the Power” (p.33)

Содержание DF-990





































































































Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды

Duplo DF-990, Инструкция по эксплуатации

Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды