12
Chapter 1 Before Operation
Copyright © 2019 Duplo Corporation All Rights Reserved
No.
Name
Function
[3]
Lamp
When the machine is in the power saving mode, the lamp blinks slowly.
When a message requiring service personnel is displayed, the lamp blinks
faster.
[4]
(start) key
Press to start paper folding.
[5]
(stop) key
Press to stop paper folding.
[6]
(test) key
Press to test fold.
By testing the paper feed, the machine will remember the thickness of the
paper.
[7]
(paper ejection) key
Press and hold to forcibly eject paper from inside the machine.
[8]
Separating pressure adjustment
scale
This scale is used when adjusting the separating pressure.
[9]
Paper feed pressure adjustment
scale
This scale is used when adjusting the paper feed pressure.
5. LCD Touch Panel
Cautions in using the touch panel
• The touch panel is designed to touch lightly with a finger or a pen (its tip radius is 0.8 or smaller).
Do not press the panel strongly with a finger or push it with any sharp objects (such as a fingernail, ball-
point pen, and pin).
• If you perform the following operations, the touch panel may not work even though you are touching it.
Additionally, note that such operations may cause malfunction of the machine.
- Operation with the tip of a nail
- Operation with a foreign object placed on the touch panel
- Operation with a protective sheet or sticker applied on the touch panel
- Operation with the touch panel being wet
- Operation with a finger wet with sweat or water
The following terms are used when explaining screen operation in this document.
Terms
Description
Touch
Lightly touching an item such as a key once with your finger.
Press and hold
Pressing an item such as a key for more than 1 second.
The press-and-hold key is surrounded by a double frame (
).
