Duplo DF-990 Скачать руководство пользователя

Страница: 34 / 100

Chapter 1 Before Operation

8. Handling Paper

8-1. Paper used

• Make sure that the printing ink on the paper has dried completely prior to use.

• Wet ink or ink that is not completely dried may stain the folding roller causing trouble such

as smearing on paper.

• Use of paper printed with special types of ink may cause the folding roller to swell or deform,

and folding misalignment may occur.

• Paper may not be fed smoothly into the folding plate or deformed folding may occur depending on

different environmental factors (temperature, humidity), paper ream weight, paper type, paper grain

direction if curled paper is used. Make sure to flatten curled paper or paper with folded lines before use.

• Separate the sheets of paper well before stacking them.

8-2. Precautions on stacking paper

[a]

[b]

[a] D

o not stack the sheets of paper on the paper

feed tray with the sides of sheets unaligned or

some sheets protruding from the stack.
This machine has an automatic standard

paper size detection function. It automatically

detects paper size at the paper feed guides.

Therefore, if paper is protruding out from the

left or right side, it is unable to detect paper

size accurately and may determine standard

paper as non-standard. (DF-999/DF-999A)

[b] Do not stack paper on the paper feed tray with

the lead and trail edges unaligned or some

sheets protruding out.

• Processing with sheets unaligned on the right or left side may cause such trouble as folding

misalignment and jamming.

• Processing with sheets unaligned on the lead and trail edges may lead to unstable feed

causing such trouble as miss-feed and double-feed.

Содержание DF-990





































































































Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды

Duplo DF-990, Инструкция по эксплуатации

Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды