Duplo DF-990 Скачать руководство пользователя

Страница: 68 / 100

Chapter 3 Advanced Operation

When the optical sensor is enabled

• Set the paper [Thickness] to [Thin], when normal operation is performed.

If a double-feed is wrongly detected though the paper thickness is set to [Thin] and no double-feed

occurs in test folding or normal operation, set to [Thick].

• Perform the test folding before you start processing the paper folding.

The machine will not start if test folding is not performed even when the

key is pressed.

When the test folding is performed, the icon changes from

• When paper shorter than 148.0 mm/5.83 inches is used, the double-feed detection is not performed.

At this time, there is no need to perform test folding.

When paper shorter than 148.0 mm/5.83 inches is used, the icon becomes

• The data on paper thickness read by test folding will be cleared by changing the [Thickness] in the

double-feed detection setting. Test fold again when the setting is changed.

• Be sure to perform test folding every time printing materials are changed to different ones

even if the quality and thickness of paper used are the same. Double-feed may not be

detected correctly if processing is started without test folding.

• Double-feed detection may not work properly if printing on paper is uneven or paper is

misaligned.

• Repeat test folding if double-feed occurs on test folding after double-feed detection is set to

on. Double-feed will not be detected correctly if paper is processed with the same settings as

when double-feed is detected on test folding.

When mis-detection occurs

Double-feed or miss-feed may sometimes be detected although the paper is fed normally.

• If false double-feed detection occurs when paper thickness is set to [Thin], repeat test folding after

setting paper thickness to [Thick].
If double-feed is detected mistakenly after selecting [Thick], double-feed detection function cannot be

used. Set the double-feed detection to [OFF].

• If false miss-feeding detection occurs when paper thickness is set to [Thick], repeat test folding after

setting paper thickness to [Thin].
If mis-feed is detected mistakenly after selecting [Thin], double-feed detection function cannot be

used. Set the double-feed detection to [OFF].

Содержание DF-990





































































































Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды

Duplo DF-990, Инструкция по эксплуатации

Результаты поиска

Содержание DF-990

Отзывы:

Похожие инструкции для DF-990

Бренды по названию

Популярные бренды