58
Chapter 3 Advanced Operation
Copyright © 2019 Duplo Corporation All Rights Reserved
5-3. B7, A7, A6 size paper (For EU)
B7, A7, A6 size paper (fed by short edge feeding) can be folded in the following conditions.
However, B7, A7, or A6 paper is regarded as non-standard paper, and the paper length should be registered,
referring to “2. Standard Folding of Non-Standard Paper” (p.46).
• The paper feed direction is only in the vertical direction.
• Folding modes that can be selected:
B7: Single fold, Gate fold
A7: Single fold
A6: Single fold, Letter fold, Accordion-fold, Gate fold
The keys of folding modes that cannot be selected are grayed and cannot be operated.
• Folding style is limited depending on the paper quality or paper size.
Chapter 7 “1. Specifications” (p.93)
If small and light paper is used, too fast processing speed will result in stream-feed (continuous
feed). Decrease the processing speed as slow as possible.
When mis-feed or double-feed occurs even though the feeding pressure and separating pressure are
set to the set value, adjust the feeding pressure and separating pressure.
Chapter 2 “3. Standard Folding of Standard Paper” (p.36)
6. Stacker Roller
6-1. Changing stacker roller height
Some thick and stiff paper may not be ejected smoothly because the paper may open after folding.
Change the stacker roller height and widen the space for the paper to pass in ejection.
1
Remove the auxiliary paper ejection guide and paper support guide.
[A]
2
Lift the stacker roller and hold it with
hand to move to the [A] position shown
in the figure.
After completing folding operations, be
sure to return the stacker roller to the
standard position. Leaving it in the raised
state will result in poor alignment of
ejected paper.
