Dukane ES, Руководство пользователя

Страница: 63 / 180

Weld Profile
Weld Profile
is the next Process Setup submenu.
This setting determines whether a constant force or
speed is applied during the weld process or whether a
10-segment profile of forces or speeds is applied
.
Constant Speed or Force
-
The constant speed
or force specified by the user is applied to the servo
for the duration of the weld.
Figure 5-17 to the right shows that Constant Weld
Speed needs to be set when choosing Constant
.
Segmented Speed or Force
-
The speed
or force profile entails a set of 10 parameters that
determine what speed or force is applied during the
specified segment of the weld process.
See Figure 5-18 and Figure 5-19 to the right.
Distance Increment
-
When the weld method
is energy or peak power, a user-specified distance
increment is required to determine the length of each
of the profile segments to track when to transition
from one profile segment to the next.
Enable Melt Detect
-
Enabling Melt Detect
allows for greater control of the part's collapse speed
profile. When enabled, another parameter must be
addressed: After Force Drops By .
After Force Drops By - The melt detect portion
of the weld is linked to the force applied by the
press, but only
after
the initial force drops by a given
percentage. It is this percentage that is entered for this
parameter (in the range of 0% to 50%).
Figure 5–16
Weld Profile Submenu Diagram
Figure 5–17
Weld Profile Constant
Figure 5–18
Weld Profile Segmented
Figure 5–19
Setting Speeds for the Segments
Process Setup, Continued from Previous Page
Process Setup, Continued
Weld Profile
Segmented
Constant
Constant Weld Speed
Enable Melt Detect After Force Drops By
Speed
Enable Melt Detect
After Force Drops By
Enable
Disable
Enable
Disable
Distance Increment
Page 57
Dukane Manual Part No. 403-587-00
Section 5 - Operation