Dukane ES, Руководство пользователя

Страница: 114 / 180

Hold
Static Hold Method
After the completion of dynamic hold, if enabled, the
press motion stops for a specified amount of time to
allow for molten plastic to solidify. This phase is called
static hold.
To program static hold, set the Static Hold Method to
Time , and enter the desired Hold Time . Once the static
hold phase is complete, the press travels back to the Top
of Stroke position.
This unique feature allows for superior consistency on
overall part height. This is unlike a pneumatic press that
continues to compress the part during the hold phase.
In addition, Static Hold can contribute to stronger weld
bonds. See Figure 6-20 below.
Continued from Previous Page
Step 14 - Test the Acoustic Stack
Run a test of the acoustic stack to confirm proper operation
before welding parts.
Please go to
Section 7
of this User's Manual,
System Opera-
tional Test
, where the system test procedures are outlined.
Figure 6-20 iQ Explorer II
, Process Settings> Post Weld > Static Hold Method
Page 108
iQ Series Ultrasonic Generator/Power Supply, Servo Systems, ES User’s Manual
Dukane Manual Part No. 403-587-00