Security
The Security menu choices control access to the program-
ming menus by using individual logins for three levels:
Administrator, Process Engineer, and Setup.
The table below shows what access each security level
has. In addition the Operator column shows the access a
generator operator would have when the three levels of
control are in use.
Main Menu Item
Persons needing an individual login.
Operator
Administrator
Process
Engineer
Setup
Graph Screen
O
O
O
O
Operate Screen
O
O
O
O
Process Setup
O
O
X
X
Process Limits
O
O
X
X
Process Utilities
O
O
O ••
X
Hardware Setup
O
X
X
X
Current Setup
O
O
O
X
O = Access X= No Access
•• =
Select Setup
is available.
Table 5 - I
Security Access to Main Menu Item
NOTE
Operator - Usually the operator does
not need to use the Security feature.
Typically an operator only monitors the
weld cycle using the Operate and Graph
screens.
Figure 5-74
Security Screen - No Passwords Set
Continued
Remote User Timeout
The purpose of this option of the Security menu is to
yield (allow) or deny access to the programming features
of the
iQ
generator under certain conditions.
This feature is most useful when a remote user (using
iQ
Explorer II
software) and a user at the generator might
both want to control the generator. A request for control
(by either user) shows on the generator display and on the
remote computer display. (See Figure 5-85, Page 92.)
If no response is given (by either user) to this request
within 30 seconds, then in whatever state the generator
had been left (
Deny Control
or
Yield Control
) before the
request for control, that is the state in which the generator
will continue to operate.
Example
: A remote user requests control of the genera-
tor, and no one is at the generator to respond to the
request. If the generator had been programmed to yield
control, then after 30 seconds, the remote user would
have control.
Access (to program the generator),
is assigned to the Administrator as
a default setting if no passwords
have been set.
NOTE
The default setting for Remote User Timeout
is Deny Control.
Page 88
iQ Series
Ultrasonic Generator/Power Supply, Servo Systems, ES User’s Manual
Dukane Manual Part No. 403-587-00
Содержание ES
Страница 127: ...SECTION 8 Maintenance Page 121 Dukane Manual Part No 403 587 00 Section 8 Maintenance ...
Страница 137: ...SECTION 10 Contacting Dukane Page 131 Dukane Manual Part No 403 587 00 Section 10 Contacting Dukane ...
Страница 171: ...Index Page 165 Dukane Manual Part No 403 587 00 Index ...
