DRESSTA 515C, Руководство оператора

Страница: 43 / 205

SECTION 3
MACHINE TRANSPORT AND STORAGE
Page 6
OM515C520C99/1E DRESSTA
LIFTING ON SLINGS
Fig. 3.4A. Method of Handling 520C Loader by a Crane (for machine equipped
with 20.5R25 Tires and 2.29 [m
3
] bucket)
1. Frame Locking Bar
Machine’s weight Q = 10800 [kG]
3.3. MOVING A DISABLED MACHINE
Towing this machine is not recommended. To move a disabled machine, use a trailer or low-boy
truck if possible. If towing is necessary, such as freeing a stuck machine, tow it only as far as
necessary. Towing machine backwards is recommended. When towing, the engine must be
running (if operative) to enable turning and braking of the machine.
Towing of machines equipped with ground driven system is easier. Prior to towing release spring
parking brake (refer to "PARKING BRAKE”, Section 5) and unlock frames by placing locking bar
in the stowed position as shown in Fig. 3.1 and 3.1A.
WARNING: When pulling with a chain or cable, take up the slack slowly to avoid
jerking. A chain or cable which fails under load can whip and cause serious
injury. Stand clear. Do not pull or tow unless the operator's compartment is
guarded against or out of reach of a whipping chain or cable.
WARNING: Observe safety precautions specified in this manual. Refer to
"SAFETY PRECAUTIONS”, Section 2.
Hook a towing line or cable of adequate strength to the towing lug. The towing load should not
exceed a force of 80 [kN].