DRESSTA 515C, Руководство оператора

Страница: 67 / 205

SECTION 4
OPERATING
Page 18
OM515C520C99/1E DRESSTA
INSTRUMENTS AND CONTROLS
37. BUCKET AND BOOM PILOT CONTROL LEVER
The lever controls raising and lowering as well as rollback and dumping operations of the bucket.
Refer to Par. 4.17.1 and 4.17.3 for additional information.
38 39 40 41 42 43 44 45
Fig. 4.9. Side Control Panel
38. Fan Control Switch
39. Heater/Air Conditioner Temperature Control Knob
40. Main Switch
41. Windshield Wiper Switch 42. Windshield Washer Switch
43. Defroster Fan Switch
44. Rear Window Wiper Switch (if equipped)
45. Rear Window Washer Switch (if equipped)
38. FAN CONTROL SWITCH
This switch controls the speed of the heater fan circulating air inside the cab. It has three positions:
•
OFF,
•
LO.
•
HI.
Move the switch to the desired position.
If the air outside is very dusty, switch the fan into “HI" position. This will create high pressure inside
the cab, which will prevent dusty air from coming into the cab.
39. HEATER /AIR CONDITIONING TEMPERATURE CONTROL
If lower temperature is required, turn the knob to the left. If higher temperature is required turn the
knob to the right.
40. MAIN SWITCH
It switches either the air conditioning or heating. It has three settings:
•
neutral,
•
heater,
•
air conditioning
WARNING! Switch off the defroster fan before adjusting the direction of flow to
avoid injury.
41. WINDSHIELD WIPER CONTROL SWITCH
This switch controls the speed of the windshield wiper motor. It has three positions:
•
OFF,
•
LO,
•
HI.
Move the switch to the desired position for low or high speed wiper operation.