manualshive.com logo in svg

DRESSTA 515C, Руководство оператора

"Операторская инструкция DRESSTA 515C теперь доступна для бесплатного скачивания с нашего сайта. Этот руководство поможет вам ознакомиться с функциями и настройками вашего оборудования. Не упустите шанс загрузить свой собственный экземпляр с manualshive.com прямо сейчас!"

Поделиться
Скачать
background image

SPECIFICATIONS

SECTION 6

Page 3

DRESSTA                                                                                                                    OM515C520C99/1E

6.1. APPLICATION

515C and 520C Wheel Loaders are modern machines of C series (i.e. second upgrade) featuring
the following foredesign criteria: optimization of performance, long service life, reliability, maximum
unification of parts and assemblies, simplified maintenance and serviceability. These  general
purpose rugged loaders are designed for various applications such as small construction site
works, various municipal applications, loading and reloading operations and transportation of loose
materials at short distances. The wheel loaders may also perform the following works:

n

 

bank loading of cohesive soils,

n

 

dozing and stockpiling,

n

 

digging and excavating,

n

 

snow removal from streets and squares,

n

 

backdragging and leveling.

The scope of works may be increased by the application of specialized equipment mounted instead
of the standard bucket such as:

1.  Multi-purpose bucket,
2.  Quickcoupling,
3.  Buckets for quickcoupling,
4.  Liftfork for quickcoupling,
5.  High-dump bucket.

6.2. TECHNICAL DESCRIPTION

Main units of 515C and 520C  wheel loaders include:

•

  Chassis,

•

  Superstructure,

•

  loader equipment.

CHASSIS
The chassis includes an articulated frame supported on two drive axles. The front one is rigidly
mounted to the frame, whereas the rear one is trunnion mounted and oscillates allowing the
machine to operate in uneven ground. The chassis comprises hydraulic, electrical and cooling
systems, as well as drive train that consists of engine, torque converter with transmission, drive
shafts, drive axles and wheels.

SUPERSTRUCTURE
The superstructure consists of a front mounted cab, hood, fenders and platforms, oil reservoirs,
tank fuel and containers.

INSTRUMENT PANEL
The instrument panel located in the cab includes gauges and warning lights necessary for
continuous monitoring operation of the machine and convenient and easy to operate controls of the
machine. The instrument panel is equipped with instruments necessary to control operation of the
machine. Control levers and pushbuttons necessary for operating the machine are located in the
cab.

OPERATOR’S SEAT
The operator's seat is equipped with armrests and a seat belt.

Содержание 515C














































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 515C

Бренды по названию

Популярные бренды

Загрузить еще бренды