Draytek Vigor2960, Руководство пользователя

Страница: 101 / 446

Vigor2960 Series User’s Guide 93
Default MAC
Address Enable – Click it to enable the default MAC address for such
profile.
Disable – Click it to type the MAC address manually for such
profile.
MAC Address If Default MAC address is disabled, please specify a MAC
address manually with the format like “00:1d:aa:b2:69:80”.
IPv4 Protocol Display the fixed type (static) for the IPv4 protocol for such
profile.
Mode
Choose NAT or ROUTING as the operation mode for such
profile.
IP Address Type the IP address (with the format like 192.168.1.25) of the
router for the LAN profile.
Subnet Mask Use the drop down list to choose a suitable mask for the LAN
profile.
Connection
Detection Mode Select a detecting mode for this LAN interface.
This feature is used to operate in coordination with Policy
Route profile. Vigor system can choose suitable router policy
through connection detection automatically.
Gateway IP
Address It is available when ARP is selected as Connection Detection
Mode.
Type a public gateway address. Vigor router will detect the
destination IP specified here automatically when such LAN
profile is used. If the IP is not detected, the connection status
for LAN will be shown as “down”.
Connection
Detection Interval It is available when ARP is selected as Connection Detection
Mode.
Assign an interval period of time for each detecting.
Connection
Detection Retry It is available when ARP is selected as Connection Detection
Mode.
Assign detecting times to ensure the connection of the LAN
interface. After passing the times you set in this field and no
reply received by the router, the connection of LAN interface
will be regarded as breaking down.
DHCP Server Enable – Click it to enable the DHCP server. The DHCP
server will assign the IP address randomly for the LAN user.
The range of the IP addresses must be defined in DHCP Start
IP and DHCP End IP.
Disable – Click it to disable the DHCP server.
DHCP Start IP Type an IP address as the starting point for DHCP server.
DHCP End IP Type an IP address as the ending point for DHCO server.
DHCP DNS Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor2960 as the DNS server.