C613-22132-00 REV A
alliedtelesis
.com
Feature Overview and Configuration Guide
Technical Guide
Introduction
This guide describes the AlliedWare Plus™ AR4050S-5G mobile broadband UTM firewall and how
to configure it.
This model has the same features as the AR4050S with the addition of 5G. 5G is a 5th generation
mobile communication system which offers high speed, large capacity and low latency. 5G allows
you to connect multiple devices that you can use to link from remote offices to your local corporate
network. You can also back up a wired Ethernet Internet connection on a corporate WAN.
The 5G feature uses an internal cellular modem that supports 5th generation mobile communication.
This modem supports configuration of carrier information used to connect to mobile carrier
networks. This modem connects automatically to 3G and 4G wireless networks giving you the best
available connection. The router connects to the fastest available wireless technology. Dual SIM
card slots support resilient mobile connectivity, with the ability to use SIM cards from two different
carriers.
5G
refers to the internal Sierra Wireless EM9191 modem. It features a higher speed wireless
connection that creates two WWAN interfaces. The interface ‘
wwan0
’ is used for the internal
EM9191 modem. The interface ‘
wwan1
’ is available for external USB 3G and 4G cellular
modems.
For more information about using USB cellular modems to connect to 3G and 4G,
see
USB Cellular Modem Feature Overview and Configuration Guide
.
Products and software version that apply to this guide
This guide applies to AlliedWare Plus™ products that support 5G modems.
AR-Series Mobile Broadband UTM Firewall model AT-AR4050S-5G - from version 5.5.2-0.2
onwards.
For further information regarding product support for this feature, see the following documents:
The
The product’s
These documents are available from the above links on our website at
.
5G Mobile Broadband UTM Firewall
