C613-22132-00 REV A
Carrier support
|
Page
22
5G Mobile Broadband UTM Firewall
The PRI files need to be for the same software version as the firmware file. For example:
The firmware file
SWIX55C_03.04.03.00-001.cwe
is for the software version
03.04.03
.
The PRI file
SWIX55C_03.04.03.00-001_DOCOMO_030.012_001.nvu
is for the same software
version.
Step 5:
Update the firmware and/or PRI
To upgrade the firmware or PRI, use the command
platform 5g update
.
Syntax
platform 5g update [firmware <
fw-name
> | pri <
pri-name
>] location <file>
See
"Upgrading firmware versions: examples" on page 23
and
"Upgrading or adding PRI files:
.
Step 6:
Optionally, install other PRI files
With version 1 and 3 firmware, you can select other PRI files, using the
carrier
command. For
example:
The maximum number of PRI files supported is 50.
Step 7:
Check the firmware
Check that the EM9191 firmware is successfully updated with the
show 5g tech firmware
command.
Step 8:
Save the configuration and reboot
We recommend that you reboot your router after you have upgraded the firmware. Use the
write
command to save the configuration and then the
reboot
command to reboot.
Note:
It you go from firmware version 2 to version 3, the number of firmware slots supported goes
from one to three on the EM9191 modem. You need to reboot, before another firmware
upgrade can be performed.
You can roll a firmware image version back if you encounter problems with a newer version. See
apn vodafone_5g
name vodafone
carrier generic
