Vigor2960 Series User’s Guide
386
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable such profile.
TX Limit(Kbps)
Define the limitation for the speed of the upstream. If you do
not set the limit in this field, the system will use the default
speed for the specific limitation you set for each index. Do
not type the value with “0”, otherwise the profile cannot be
saved.
RX Limit(Kbps)
Define the limitation for the speed of the downstream. If you
do not set the limit in this field, the system will use the
default speed for the specific limitation you set for each
index. Do not type the value with “0”, otherwise the profile
cannot be saved.
Mode
Select
Each
to make each IP within the range of Start IP and
End IP having the same speed defined in TX limit and RX
limit fields; select
Shared
to make all the IPs within the
range of Start IP and End IP share the speed defined in TX
limit and RX limit fields.
general target
Time Object
- Click the triangle icon
to display the
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
to create another
new time object profile.
Содержание Vigor2960
