Draytek Vigor2960, Руководство пользователя

Страница: 313 / 446

Vigor2960 Series User’s Guide 305
Hello message will be emitted periodically when a tunnel is
idle. Use the value 0 to disable this function. The
recommended value is 30 seconds if enabled.
DPD Timeout
It is the timeout timer. The peer will be declared dead once
no acknowledge message is received after timeout value.
Use the value 0 to disable this function. The recommended
value is 120 seconds if enabled.
If you choose SSL as the Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile Display the name of the VPN profile.
Enable Check this box to enable such profile.
Always On
Click Enable to make the profile being always on.
Dial-Out Through Choose a wan profile to be used by such profile. Then, use
the
default WAN IP or specify a WAN Alias IP for VPN
tunnel.
Failover to Choose a wan profile which will lead the data passing
through other WAN automatically when the selected WAN
interface (in
Dial-Out Through ) is failover.
Idle Timeout When Always On is disabled, you have to type the value for
terminating the network connection.
Server IP/Host
Name Type the IP address or host name of SSL VPN server.
SSL User Name Type a user name for authentication in SSL VPN connection.
SSL Password Type a password for authentication in SSL VPN connection.