© Copyright 2006 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
25 September 2006
Checking the Package Contents
Connecting
Planning the Configuration
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
Documentation
FortiAnalyzer-2000
Copyright 2006 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Power Cable
Front
Ethernet
Connections
RJ-45
Serial
Connection
LCD
Panel
LED indicators:
Power, Error, Network Access
Back
Power
Connections
USB ports
for future use
RJ-45 to
DB-9 Serial Cable
Q u i c k S t a r t G u i d e
Power cable connects
to power outlet
Backup
power outlet
Straight-through Ethernet cable connects
to hub or switch on the network
RJ-45 to DB-9 serial cable connects
to management computer
Place the FortiAnalyzer unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance
on each side to allow for cooling.
Make sure the power is not plugged into the wall before connecting the power cable.
The Status light flashes while the unit is starting up and remains lit when the system is up
and running.
•
•
•
Connect the FortiAnalyzer unit to a power outlet and to the network hub or switch.
FortiAnalyzer-2000
05-30003-0237-20060925
Connector
Type
Speed
Protocol
Description
Ports 1, 2, 3, 4
RJ-45
10/100Base-T
Ethernet
Connection to the network
CONSOLE
RJ-45
9600 bps
RS-232
Connection to the management computer. Provides
access to the command line interface (CLI).
You can add the FortiAnalyzer unit to your local FortiGate network to receive log messages
from your local FortiGate units, or connect the FortiAnalyzer unit to the FortiGate units re-
motely using FortiManager. To connect the FortiAnalyzer unit to the FortiGate units remotely,
you must configure the DNS server and the default gateway.
To manage the FortiAnalyzer unit, you can use a computer within the local network or over
the Internet.
Factory Defaults
Administrator Account
User name:
admin
Password:
(none)
Port 1
IP:
192.168.1.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
Port 2
IP:
192.168.2.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
Port 3
IP:
192.168.3.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
Port 4
IP:
192.168.4.99
Netmask:
255.255.255.0
Management Access:
ping, https, http, ssh
FortiAnalyzer Unit LED Indicators
Light Icon
Description
ID
FortiAnalyzer system iD.
!
System status. This light is on when a system or hardware is running
properly. The light blinks when a non-critical condition occurs.
Power indicator.
Hard disk activity. The light flashes as log packets are written to
the FortiAnalyzer hard disk, and when the FortiAnalyzer unit ac-
cesses the hard disk to generate reports.
