Docomo prosolid II foma P851i, Руководство пользователя

Страница: 88 / 488

86
Moving
Image
Quality
Making
Calls/Receiving
Calls
Video-phone Moving image quality
・
Normal ····················Displays/Sends images in standard quality and motion speed.
・ Prefer img qual·······Displays/Sends images laying stress on image quality.
・
Prefer motion spd ··Displays/Sends images laying stress on motion speed.
1
●
You can set the image quality also from the Function menu by pressing ( ) during a video-phone call.
⇒
See page 85
In that case, the setting will be effective only during that video-phone call.
●
“Prefer motion spd” is effective for moving images. When there is little motion, the quality becomes better if you set to “Prefer img
qual”.
●
If the radio wave conditions weaken during a video-phone call, the image may appear like a mosaic.
You can set the quality of the other party’s image on the display and of your image to be sent.
You can set the image to be sent to the other party during a video-phone call.
Video-phone Select image
・ On hold·····························Sets the still image to send during answer-hold.
・
Holding·····························Sets the still image to send during call hold.
・
Substitutive image ··········Sets the substitutive image (still image or Chara-den image) to
send.
・ Record message ·············Sets the still image to send while recording a record message from callers.
・
Preparing ·························Sets the still image to send while playing back an answer message for a record message.
・
Voice memo ·····················Sets the still image to send while recording a voice memo.
1
<Moving Image Quality>
Setting Image Quality for Video-phone Calls
Setting at purchase
Normal
<Select Image>
Changing Image Displays for Video-phone Calls
Setting at purchase
On hold······················Pre-installed
Holding ······················Pre-installed
Substitutive image····Pre-installed
Record message·······Pre-installed
Preparing···················Pre-installed
Voice memo ··············Pre-installed
Select an image
・
Pre-installed ······A still image with a message is displayed. You cannot change the still image.
(The setting is completed.)
・ Original ··············A still image stored by “Set image” (see page 306) with a message is
displayed; the message is the same as the one for “Pre-installed”.
To change the settings
⇒
Go to step 3
・
Chara-den ··········Chara-den image set by “Substitutive image” (see page 83) is displayed.
To change the settings
⇒
Go to step 3
(This is displayed only when you select "Substitutive image" in step1.)
● You can play back and check the still image or Chara-den image by pressing ( ).
(When you press , the play ends.)
2
Image Selection display
Information
( ) Change setting
■
If you have selected “Original”
Select a folder Select a still image
●
Still image folders and lists
⇒
See page 300
●
You can play back the demonstration and check the still image by pressing ( ). (When you press
, the playback ends.)
■
If you have selected “Chara-den”
Select a Chara-den image
●
You can play back and check a Chara-den image by pressing ( ). (When you press , the
playback ends.)
3