Docomo prosolid II foma P851i, Руководство пользователя

Страница: 274 / 488

272
Compose
SMS
Mail
Composing SMS (Short Messages) to Send
<Compose SMS>
You can compose and send SMS messages.
●
You can send and receive SMS messages to and from subscribers of overseas carriers other than DoCoMo.
See the DoCoMo web page for the countries and overseas carriers available for the service.
Stand-by display Compose SMS
●
You can start also by
→
“Compose SMS”.
1
SMS Composition display
●
If the Draft box already contains five draft mail messages, you cannot compose an SMS
message.
Send or delete the draft mail messages and then try again.
Select the address field Enter the destination phone number
Only one address can be specified.
●
You can enter up to 21 digits (except “+”).
●
When the address is that of overseas carriers other than DoCoMo, enter “+” (press and hold for at least one second),
“country code”, and “mobile phone number” in that order. When the phone number starts with “0”, enter the phone number
excepting “0”. Also, you can send messages by entering “010”, “country code” and “mobile phone number” in that order. (To
reply to the received SMS messages from overseas, enter “010”.)
●
To call up the address from the Phonebook or records
⇒
See page 214
2
Select the text field Enter text
●
The number of characters you can enter varies according to the “SMS input character”.
3
Press ( ).
The animation display under transmission appears and mail is sent.
4
OK
5
●
Depending on the radio wave conditions, the characters might not be sent successfully to the destination.
●
When the number of sent mail messages exceeds the maximum number of storage, they will be overwritten starting from the oldest
sent mail. However, protected sent mail cannot be overwritten.
●
If you do not send the mail and instead press or , the message “Cancel and discard work in progress?” will be
displayed. Select “YES”
→
to delete all the text entered so far. Select “NO”
→
to return to the former display.
●
If you attempt to send an SMS message to the phone number prefixed by “184” or “186”, the message “Send without prefix
numbers?” will be displayed. Select “YES”
→
to delete “184” or “186” and send the mail. Select “NO”
→
to return to the
former display.
● Even if “Activate” of “Caller ID notification” is set to “OFF”, your caller ID is notified to the other party you send an SMS message to.
Information