Docomo prosolid II foma P851i, Руководство пользователя

Страница: 141 / 488

139
Change
Security
Code
Safety
Settings
When the PIN1 Code or PIN2 Code Entry display appears, enter your four- to eight-digit PIN1 code/PIN2
code and press
.
●
If this is your first entry such as after the contract, enter “0000”.
●
The entered PIN1 code or PIN2 code is displayed as “_”.
●
If you enter a wrong PIN1 code or PIN2 code three times in succession, further entry will be locked.
(“Rest” appears on the display to notify you of possible entering frequency.)
Enter the correct PIN1 code or PIN2 code; “Rest” will return to three times.
How to release PIN Lock
⇒
See page 141
For PIN1 code
You need to enter your four-digit “i-mode password” for registering or deleting My Menu, and applying
for or canceling a message service or i-mode pay service.
The default for the i-mode password is “0000”, but you can change it as you like.
(Some Information Providers may provide you with their specific password.)
●
Note that if you do not remember your i-mode password, you need to bring an identification card such as a
driver’s license to a handling counter such as a DoCoMo shop.
●
To prevent mischief, change the Terminal Security Code/PIN1 code or PIN2 code/i-mode password as you like after the contract.
Also, keep a separate record of them just in case you forget them.
● Do not use the easy-to-decipher figures such as lower four digits of the phone number to prevent it from being known by others.
Information
Changing Terminal Security Code
<Change Security Code> Menu 29
Change the default for the Terminal Security Code required for operating functions to your own four- to
eight-digit code so that you can make full use of the FOMA phone. Also, keep a separate note of your
security code just in case you forget it.
Lock/Security Change security code
1
Enter the current Terminal Security Code
2
●
If you enter the code for the first time such as after contract, enter “0000”.
Enter a new Terminal Security Code (four to eight digits) YES
3
● To cancel: “NO”
● This setting changes the Terminal Security Code required for operating functions.
Information
Password
i-mode Password