Docomo prosolid II foma P851i, Руководство пользователя

Страница: 305 / 488

303
Picture
Viewer
Data
Display/Edit/Management
You can display the image.
●
You can switch between the actual size and the display size
each time you press . (You may not be able to switch
depending on the setting of “Set image disp.”, the file size,
or image size.)
⇒
See page 306
You can paste the still image to the Stand-by display and other
displays.
⇒ See page 307
You can display information.
⇒
Go to step 2 on page 213
You can compose i-mode mail attached the still image.
●
When an image size is larger than QVGA (320 x 240), the
display for selecting how to convert the still image appears.
In this case, select an item from the followings and press
.
・ Attach mail
・
QVGA scale down
・
QVGA trim away
The screen size is converted and file size is also
automatically converted to 500 Kbytes or less.
● When you scale down or cut out the still image to QVGA
(320 x240) size, press ( ) to scale down or cut
out the image again. You can scale down or cut it out again
also by ( )
→
“Cancel”. Select ( )
→
“Set” to display the Message Composition display.
⇒
See page 329
You can send the data item using infrared rays.
⇒
Go to step 2 on page 213
You can compose Deco mail using the data in the “Decomail-
picture” folder. (Deco mail ⇒ See page 219)
●
When an image size is larger than Sub-QCIF (128 x 96), the
display for selecting how to convert the still image appears.
In this case, select an item from the followings and press
.
・ sub-QCIF scale down
・ sub-QCIF trim away
The image size is converted and file size is also automatically
converted to Deco mail size or less. Even if the image size in
converted, proportional ratio of the still image is retained.
⇒
See page 132
⇒
See page 95
You can store the still image in a Phonebook entry.
Add picture to PB
Add desktop icon
Decorate mail
Send Ir data
Compose message
Picture info
Set display
Display picture
You can change the still image to the file size or image size
that can be pasted to i-mode mail. The size of the original file is
not changed but it is separately saved as a new one. The
acquired source of the newly saved still image is displayed as
“ ”.
Select from the followings
• Attach mai
• QVGA scale down.
• QVGA trim away
YES
●
The image size is converted and file size is also
automatically converted to 500 Kbytes or less.
● If you scale down or cut out the still image to QVGA (320
x 240) size, press ( ) to scale down or cut it
out again. You can scale down or cut it out again also by
pressing ( ) and selecting “Cancel”.
Press ( ) and select “Save” for saving the
still image.
●
When images are stored to the maximum
⇒
See page 185
You can set the position for when you paste the still image to
the Stand-by display.
Set Display
⇒
See page 306
Select from the followings.
• Center (Setting at purchase)
• Top
• Bottom
You can set the clipping area for when you paste the still image
to the Stand-by display.
Set Display
⇒
See page 306
Select from the followings.
• Center (Setting at purchase)
• Upper
• Lower
Enter a file name
●
You can enter up to 36 half-pitch alphanumeric characters.
Edit file name
Clipping area
Positioning
2
1
Size for mail
Next Page