![Docomo prosolid II foma P851i Скачать руководство пользователя страница 337](http://html1.mh-extra.com/html/docomo/prosolid-ii-foma-p851i/prosolid-ii-foma-p851i_manual_2515063337.webp)
335
Multiaccess
Other
Useful
Functions
Make a Voice Call during i-mode or during Packet Transmission
1
During i-mode or packet transmission
Stand-by display
The Stand-by display appears.
During i-mode
2
Enter the phone number to call.
⇒
See page 52
i-mode or packet transmission stays connected.
●
If you make a video-phone call during i-mode, i-mode is
disconnected and the video-phone call is made. After
you finish the video-phone call, the i-mode display
returns.
●
You cannot make a video-phone call during packet
transmission.
●
To switch the displays, press and hold
for at
least one second; or press
and switch from
TASK MENU.
⇒
See pages 336 and 337
Receive a Voice Call during i-mode or during Packet Transmission
1
Press
to answer the call when a
call comes in.
i-mode or packet transmission stays connected.
●
You cannot receive a video-phone call.
●
To switch the displays, press and hold
for at
least one second; or press
and switch from
TASK MENU.
⇒
See pages 336 and 337
●
To return to the display for i-mode or packet
transmission without answering the call, press and hold
for at least one second. Press and hold
for at least one second again to return to the Call
Receiving display.
The caller hears not a message but a ringing tone.
■
If a call comes in during a call
If you have subscribed to Call Waiting Service, the ring tone
sounds and the message to the effect that you can end the
call/transmission to answer the incoming call is displayed
when a call comes in during a call or 64K data transmission.
You can transfer the incoming call to the Voice Mail Center or
forward to the forwarding destination to resume the current
call, or end the current call to answer the incoming call.
To continue the current call:
1. Press
or
.
●
If another voice call comes in during a voice call, the
message to the effect that you can answer the call is
not displayed. Perform the operation in step 2 from the
Call Receiving display.
2. Press
(
)
Select from the followings.
・
Call rejection: You can reject an incoming call and
resume the current call.
・
Call forwarding: You can forward a call to the
forwarding destination and resume the current call.
・
Voice mail: You can connect an incoming call to the
Voice Mail Center and resume the current call.
To answer an incoming call:
・
When a video-phone call comes in during a video-phone
call
When a voice call comes in during a voice call
When 64K data transmission is received during 64K data
transmission
1. Press
or
.
●
If another voice call comes in during a voice call,
the message to the effect that you can answer the
call is not displayed. Perform the operation in step 2
from the Call Receiving display.
2. Press
.
The current call ends and the Call Receiving display
appears. Then, you can answer the incoming call.
・
Other than combinations above:
1.
or
Select the communication to end
●
To end the video-phone call, select “Connecting V-
phone” , to end the voice call, select “Talking”, and
to end the 64K data transmission, select
“Connected data”, respectively.
●
You can select the communication to end also by
pressing and holding
for at least one
second to switch the tasks.
2. Press
.
The current call ends and the Call Receiving display
appears. Then, you can answer the incoming call.
●
Incoming calls are rejected when a video-phone is
connected, during call on hold, or while Record Message
is working. When the current call ends, the “Missed call”
icon is displayed and the received call record is stored.
(The “Missed call” icon might not appear and the received
call record might not be kept depending on the contracts
and setting for Voice Mail, Call Waiting, and Call
Forwarding Services.)
●
If a call comes in during a video-phone call, the moving
image, i-motion movie or Flash movie set as the image
for incoming calls is not displayed.
●
If a call comes in during a video-phone call, a “Pre-
installed” substitutive image is sent to the other party of
the current call.
●
If a call comes in during a video-phone call, the vibrator
does not work.
Information
Содержание prosolid II foma P851i
