Docomo prosolid II foma P851i, Руководство пользователя

Страница: 140 / 488

138
Passwords
Safety
Settings
Passwords
For some functions of the FOMA phone, you need to enter your password. In addition to the Terminal
Security Code for operating respective mobile phone functions, the Network Security Code to use network
services, and i-mode password are available. These passwords help you utilize your FOMA phone.
When the display for entering the Terminal Security Code appears, enter your four- to eight-digit code
and press
.
The Terminal Security Code is set to “0000” at purchase but you can change it as you like.
●
Note that if you do not remember your Terminal Security Code, you need to bring the FOMA phone
※
, UIM, and an
identification card such as the driver’s license to a handling counter such as a DoCoMo shop.
※
If you are not the subscriber who purchased the FOMA phone, we may not be able to handle your request.
The Network Security Code is a four-digit number that is determined at the time of contract, which is
used for using network services or for procedures on DoCoMo e-site.
●
If you do not remember your Network Security Code, consult “DoCoMo Information Center” described on the
back page of this manual. The handling counters such as a DoCoMo shop check documents such as driver’s
license to see if you are really yourself and then go to the procedure for resuming your Network Security Code. If
you have “My DoCoMo ID”/“Password”, you can also use a personal computer to take proceedings from e-site.
※
See the back page of this manual for “DoCoMo e-site”.
For the UIM, you can set the two security codes, namely the PIN1 code and PIN2 code.
The default for these security codes is “0000”, but you can change these codes as you like.
The PIN1 code is the four- to eight-digit code for checking the user each time the UIM is inserted into the
FOMA phone or each time the FOMA phone is turned on so that you can prevent the third party from
using your UIM. By entering your PIN1 code, you can make or take calls, or use functions in the FOMA
phone.
The PIN2 code is the four- to eight-digit code for using the user certificate or applying for the issue of it
and executing Reset Call Charge.
●
If you purchase a new FOMA phone and use the existing UIM with the new FOMA phone, use the PIN1 code and PIN2 code you have
set previously. If you have not changed the PIN1 code and PIN2 code, those are “0000”.
●
“_” is displayed instead of the entered numbers.
●
If you have entered a wrong code or nothing for about 15 seconds, a warning tone sounds and a warning
message is displayed; then the display prior to the entering the Terminal Security Code returns. Check
the correct code and try again.
Security code
1
Terminal Security Code
Security code
2
Security code
3
Network Security Code
PIN1 Code/PIN2 Code