Docomo prosolid II foma P851i, Руководство пользователя

Страница: 115 / 488

113
Vibrator
Tone/Display/Light
Setting
Select a vibrator pattern
・ Pattern 1··················Alternates between vibration ON (about 0.5 seconds) and OFF (about 0.5 seconds).
・ Pattern 2··················Alternates between vibration ON (about 1 second) and OFF (about 1 second).
・
Pattern 3··················Alternates between vibration ON (about 3 seconds) and OFF (about 1 second).
・
Melody linkage ·······Vibrates in time with the ring tone.
・
OFF ··························Does not vibrate.
●
While you are selecting a pattern, the FOMA phone vibrates by the selected pattern for confirmation.
However, it does not vibrate if you select “Melody linkage”.
●
The following icons are displayed while the vibrator is set:
: Vibration for incoming voice calls or video-phone calls
: Vibration for incoming mail, chat mail or Messages R/F
: Vibration for incoming voice calls, video-phone calls, mail, chat mail, or Messages R/F
2
● You cannot set the vibrator for the Phonebook entries stored in “Secret mode”, “Secret only mode”, and in the UIM.
●
Note that the setting for “Vibrator” of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request”
in advance.
●
Note that this function is released if you change the set phone number or mail address.
●
To change the set vibrator, release the current setting and proceed.
● When you receive the i-mode mail from the address “phone number@docomo.ne.jp”, the mail vibrator set for the phone number in
the Phonebook will work.
●
Use “Utilities” to check which phone number or mail address in the Phonebook entry is set, or to release the setting.
Information
● The priority order of vibrator is; “Setting by phone number or mail address” → “Setting by group” → “Vibrator”.
● When different types of mail — i-mode mail, SMS messages, chat mail, or Messages R/F — are received at the same time, the
priority order of vibrator is; “Chat mail”
→
“i-mode mail/SMS”
→
“MessageR (Request)”
→
“MessageF (Free)”.
If you receive the same type of mail simultaneously, the vibrator corresponding to the mail you have received last works.
●
While “Ring volume” is set to anything other than “Silent” and the vibrator is set, incoming calls and mail are indicated by the ring
tone and vibration. While “Ring volume” is set to “Silent”, incoming calls and mail are indicated by vibration only.
● The vibrator vibrates at a regular strength, regardless of the ring volume.
●
Even when “Melody linkage” is set, the FOMA phone vibrates with “Pattern 2” if an i-motion movie is set for the ring tone.
●
Even when “Melody linkage” is set, the FOMA phone vibrates with “Pattern 2” if no vibration pattern is set for the ring tone.
● Even when “Melody linkage” is set, the FOMA phone does not necessarily vibrate in time with a main melody.
●
Be careful not to leave the FOMA phone on a desk or similar places with the vibrator activated; when a call comes in, the FOMA
phone might move and fall by vibration.
● It is advisable to deactivate the vibrator during charging.
Information
You can set a vibrator for each phone number or mail address stored in the FOMA phone’s Phonebook.
Detailed Phonebook display Use to select an item to be set ( )
Utilities
・
Vibrator ···················Sets a vibrator pattern for voice calls and video-phone calls from the specified phone number.
・
Mail vibrator············Sets a vibrator pattern for i-mode mail from the specified mail address and SMS messages from the
specified phone number.
Go to step 2 on this page.
The selected item is indicated by “ ★ ”.
●
How to search the Phonebook
⇒
See page 97
●
To release the vibrator for the phone number or mail address, perform the same operation.
1
Set by Phone Number or Mail Address