305
Picture
Viewer
Data
Display/Edit/Management
●
If you change the image size, the size of the original file is
not changed but it is separately saved. The acquired source
of the newly saved still image is displayed as “
”.
●
Even if the image size in converted, proportional ratio of the
still image is retained.
●
If you perform "QVGA trim away", the image may be short.
●
If the file size of the still image is converted to more than 500
Kbytes, "Attach mail" is disabled.
●
If you send a JPEG image in excess of 10,000 bytes to an
i-mode phone, the image is converted to “the size fit to the
i-mode phone” at the i-shot Center.
●
QVGA (320 x 240) size is the most suited file size to send to
an i-mode phone.
●
When the images are stored to the maximum
⇒
See page 185
●
You cannot compose i-mode mail in the following cases:
• When five draft mail messages are saved
• Flash movies
• GIF files in excess of 10,000 bytes
• JPEG files in the extension base line format in excess of
500 Kbytes
• Files whose output from the FOMA phone is prohibited
●
Attaching the file set with the file restriction to mail
⇒
See
page 304
●
When you scale down or cut out the still image to Sub-QCIF
(128 x 96) size, the size of the original still image is not
changed but it is separately saved. The acquired source of
the newly saved still image is displayed as “
”.
●
If you scale down or cut out the still image to Sub-QCIF (128
x 96) size, press
(
) to scale down or cut out that
image again. You can scale down or cut it out again also by
pressing
(
) and selecting “Cancel”. When you
press
(
) and select “Set”, the Message
Composition display appears.
●
When images are stored to the maximum.
⇒
See page 185
●
You cannot compose Deco mail in the following cases:
• When five draft mail messages are saved
• Flash movies
• GIF files in excess of the maximum size to compose Deco
• JPEG files in excess of the maximum size to compose
Deco mail
• Files whose output from the FOMA phone is prohibited
●
Even if the image size in converted, proportional ratio of the
still image is retained.
●
If you perform "QVGA trim away", the image may be short.
●
If the file size of the still image is converted to more than 500
Kbytes, "Attach mail" is disabled.
Information
●
The file name, title, storage location, and acquired source of
the saved file are as follows:
• File name: “YYYYMMDDhhmmnnn” (Y: year, M: month,
D: date, h: hour, m: minute, n:number) image
(when date and time are not set)
• Title:
“YYYY/MM/DD hh:mm” (Y: year, M: month, D:
date, h: hour, m: minute) image (when date
and time are not set)
• Storage location: Folder the source file is saved to
• Acquired source:
●
You cannot change the file size for mail in the following
cases:
• Files other than JPEG
• Files of QVGA (320 x 240) size or less and 500 Kbytes or
less
• JPEG files in the extension base line format
• Files whose output from the FOMA phone is prohibited
●
You cannot set “Positioning” for a Flash movie.
●
The set display position is valid for the Stand-by, Wake-up,
Dialing, Call Receiving, Video-phone Dialing, VP Call
Receiving, Mail Sending, Mail Receiving, and Check New
Message displays. But the still image may not be positioned
in the specified place depending on its size.
●
The set clipping area is valid for the Stand-by, Wake-up,
Dialing, Call Receiving, Video-phone Dialing, VP Call
Receiving, Mail Sending, Mail Receiving, and Check New
Message displays. But the still image may not be clipped in
the specified area depending on its size.
●
You cannot edit the file name for the following files:
• Pre-installed images
• When the unused space inside the FOMA phone is not
enough
• Files whose output from the FOMA phone is prohibited
• Moving images attached to the mail you are composing
●
If you try to edit the file name of a JPEG format image or of i-
motion movie in excess of 10,000 byte which is attached to
mail, the confirmation display appears asking whether to
cancel the attachment. Select “YES” or “NO”
→
.
●
You cannot use half-pitch space for the file name.
●
Even if you set “File restriction” to “File restricted”, the still or
moving images can be output from the sender’s mobile
phone by sending it via the infrared exchange function.
●
You cannot set the file restriction for the following files:
• Moving image files without the information on the
redistribution
• Still images that exceed 700 Kbytes by applying the file
restriction
• Moving images that exceed 800 Kbytes by applying the file
restriction
• Still images other than JPEG files
• Files whose output from the FOMA phone is prohibited
Information
Next Page
<Positioning>
<Clipping area>
<Edit file name>
<File restriction>
<Compose message>
<Size for mail>
<Decorate mail>
Содержание prosolid II foma P851i
