Docomo prosolid II foma P851i, Руководство пользователя

Страница: 237 / 488

235
Display
Image/Save
Image
Mail
●
If the size of the image is larger than that of the screen, it is displayed reduced. However, too large image may not be displayed.
● Images inserted into the text of Deco mail are displayed automatically. Images attached to Deco mail are not displayed
automatically.
●
The image displayed from the i-mode mail and that from the Picture viewer might differ. To correctly display the image, you need to
save the image to a folder within “My Picture” and then display it from the Picture viewer.
●
In this manual, file name displays may be used for illustrative purposes instead of image displays.
Information
You can save attached images, and set them as the Stand-by display and Wake-up display.
●
You do not need to operate this for JPEG images in excess of 10,000 bytes as they are saved when received.
Save Data
Detailed Sent Mail display/Detailed Received Mail display Select an attached
image
( ) Save data YES
Go to step 2 on page 181.
●
To cancel: “NO”
●
When images are stored to the maximum
⇒
See page 185
1
You can save images inserted into the Deco mail text, and set them as the Stand-by display and Wake-up
display.
Save Decoration Image
Detailed Sent Mail display/Detailed Received Mail display/Detailed Template display
( ) Save decor. image Select an image
YES
Go to step 2 on page 181.
●
To cancel: “NO”
●
When images are stored to the maximum
⇒
See page 185
1
■ When you receive a JPEG image in excess of 10,000 bytes
When you receive i-mode mail attached with a JPEG image in excess of 10,000 bytes, the image is automatically obtained and saved
to the “i-mode” folder. If “ image” appears, the image is not automatically obtained and it is kept at the i-shot Center.
Obtain the stored image and save it to the “i-mode” folder.
1. Select “
image” → .
Obtaining the JPEG image in excess of 10,000 bytes starts. When the obtaining is completed, the image is saved and then the
Received Mail display returns.
●
To cancel midway, press and hold for at least one second. However, the image might be obtained depending on the timing.
●
If obtained data is invalid, “ ” is displayed.