Docomo prosolid II foma P851i, Руководство пользователя

Страница: 124 / 488

122
Display
Phonebook
Image
Tone/Display/Light
Setting
Display Display setting Power saver mode
・
ON ··········If no operation is done for a certain period of time on the Stand-by display, the display goes off and the Command
Navigation key, , , , and flicker at about five-second intervals when the FOMA phone is open.
・ OFF ········Does not switch to Power Saver Mode.
1
Incoming call Disp. phonebook image
・
ON
・
OFF
1
You can set an image for incoming calls from each phone number stored in the FOMA phone’s Phonebook.
Detailed Phonebook display ( ) Utilities Picture
Go to step 3 on page 121.
“Picture” is indicated by “
★
”.
●
How to search the Phonebook
⇒
See page 97
●
When multiple phone numbers are stored in the Phonebook entry, press on the detailed display to display the phone
number to which the image is set.
●
To release the calling image for the phone number, perform the same operation.
1
Set Power Saver Mode
You can set Power Saver Mode to reduce the battery consumption by clearing the display.
Setting at purchase
ON
● The setting here applies to “Power saver mode” of “Display light” as well. Also, use “Light time (minutes)” of “Display light” to specify
a standby time until Power Saver Mode is set to “ON”.
⇒
See page 125
●
The FOMA phone does not switch to Power Saver Mode during a call, during data transmission, during charging, or while i-
α
ppli
Stand-by display is set.
●
Power Saver Mode is released in the following cases:
• When any key is pressed • When a call comes in • When a mail message or Message (R/F) arrives
• When Alarm tone (for Alarm, Schedule, ToDo, or battery expiration) sounds
• When i-
α
ppli launches automatically • When the FOMA phone is opened or closed
●
In bright places, flickering of the Command Navigation key, , , , and might be hard to see.
Information
Displaying an Image Stored in the Phonebook during Ringing
<Display Phonebook Image>
Setting at purchase
ON
If the caller ID notified by the caller matches the phone number stored in the Phonebook, the image
stored in the Phonebook is displayed.
●
The priority order of the display for call receiving is; “Setting by phone number”
→
“Setting by group”
→
“Disp. phonebook image”
→
“Display setting”.
Information
●
You cannot set the calling image for the Phonebook entries stored in “Secret mode”, “Secret only mode”, and in the UIM.
●
Note that the setting for “Picture” of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request” in
advance.
●
Note that the setting is released if you change the specified phone number.
●
To change the set calling image, release the current setting and proceed.
●
Use “Utilities” to check which phone number in the Phonebook entry is set, or to release the setting.
Information
Set by Phone Number