Docomo prosolid II foma P851i, Руководство пользователя

Страница: 65 / 488

The subaddress is the number required for receiving services such as Subaddress Notification Service
of ISDN. If you set “Sub-address” to “ON”, “ ” included in the phone number is regarded as a separator
and subsequent numbers are identified as a subaddress so that you can call a specific phone or connect
to a data terminal.
Further, You can use this function for selecting contents from “V
LIVE ”.
2
Other settings Sub-address
・
ON ··········Regards “ ” and onward as a subaddress.
・
OFF ········Does not regard “ ” and onward as a subaddress.
2
2
1
●
Even if you set “Sub-address” to “ON”, “ ” at the top of phone numbers and “ ” immediately after the prefix number or
“186 (or 31#)”/“184 (or #31#)” are not regarded as subaddress mark-off symbols.
2
2 2
You can add a prefix number to the top of phone number when you make a call.
( ) Prefix numbers Select a prefix item
● Press ( ) or to make an international call (or video-phone call).
2
Enter a phone number,
or bring up the detailed display of a Phonebook entry, redial item, dialed call record,
or received call record.
1
Prefix Numbers
<Subaddress Setting>
Making a Call with Specified Subaddress
Setting at purchase
ON
Information
63
Subaddress
Setting
Making
Calls/Receiving
Calls
You can select an alarm that sounds until you are reconnected after disconnected owing to bad radio
wave conditions.
Talk Reconnect control
・
No tone····················Does not sound.
・ High tone·················High alarm sounds.
・
Low tone ·················Low alarm sounds.
1
●
The call fee is charged for the time until you are reconnected (up to about 10 seconds).
●
The reconnectable time varies depending on the usage status and radio wave conditions. An estimate is about 10 seconds.
●
While you are disconnected, no sound is transmitted to the other party.
●
An alarm for “Reconnect control” does not sound during switching between a voice call and video-phone call.
<Reconnect Control> Menu 77
Selecting Alarm for Reconnecting
Setting at purchase
No tone
Information