Docomo N-05A, Руководство пользователя

Страница: 448 / 601

446
Over
seas Use
Re-searching for the network
<Network re-search>
z
You can re-search for a network then
connect to the network if “NW search mode”
is set to “Auto” and an operator could not be
searched for, or if “NW search mode” is set
to “Manual” and you want to change
operators.
1 NW search mode screen
(P.445) “Network re-
search” Select an operator
■
When “NW search mode” is set to
“Auto”
“Network re-search”
Setting an operator to be
preferably connected
You can set an operator to be preferably
connected when searching or re-searching the
network automatically.
z
The PLMN network list can store up to 20
operators.
z
Operators designated by DOCOMO are
stored to the PLMN network list.
1 NW search mode screen
(P.445) “PLMN setting”
Operators are listed in
the priority order in the
“PLMN setting screen”.
2 Highlight the operator whose
priority is to be changed
u
(FUNC) “Change priority”
3
Highlight the position to
move to
d
(Select)
The selected operator moves to the
position above the highlighted item.
Select “<last>” to move to the end.
4
o
(Finish) “YES”
PLMN setting screen (P.446)
PLMN manual select …… Enters and stores
Country code (Operator Code (MCC)) and
Network code (Operator Code (MNC)).
PLMN select …… Selects and stores the operator
from the list.
Set VPLMN to PLMN
……
Stores the currently
selected operator.
Change priority → P.446
Delete …… Selects the deleting method from
“Delete this, Delete selected, Delete all”.
Displaying the Roaming
Operator’s Name
<Display operator name>
You can set whether to display the name of the
currently connected operator on the display
during the international roaming.
1
i
“Settings” “Other
settings” “Int’l roaming”
“Display operator
name” “Display ON” or
“Display OFF”
Function menu P.446
PLMN setting
N
z The priority may not apply depending on the
conditions of radio waves or networks.
N
z
Even when set to “Display ON”, the name of
the operator is not displayed when you are in
Japan (in the FOMA network).