Docomo N-05A, Руководство пользователя

Страница: 123 / 601

121 Continued on next page
Sound/Scre
en/Light Settings
Mail …… Sets whether to display the sender/
date and time/subject (ON/OFF) or not
during a receiving the mail.
Connection …… Sets whether to display the
image or animation (ON/OFF) or not during
dialing calling or data communication.
Background i-
α
ppli …… Sets whether to
display the i-
α
ppli for the rear panel display
or not (ON/OFF).
Display time …… Selects the display time
from “15 seconds, 1 minute, All-time ON”.
3 Set the respective items
o
(Finish)
Setting the Illumination
Setting the flashing mode of the
illumination lamp for incoming
calls
<Illumination>
You can set the color and pattern (flashing
pattern) with which the illumination lamp
flashes when you receive voice/videophone
calls, mail, chat mail or MessageR/F.
z You can set different flashing colors
respectively for incoming calls and
messages from specific phone numbers, e-
mail addresses and groups.
→
P.100
1
i
“Settings” “Illumination”
“Incoming call” Select
any item:
Color
……
Selects the flash color of the
illumination lamp from “Phone (voice phone)/
Videophone/Mail/Chat mail/MessageR/
MessageF”.
When you switch the highlighted item while
selecting an item, the illumination lamp lights
up in the highlighted color.
Color 1 to 7: The lamp flashes by the
selected color.
Gradation: The lamp flashes by the colors of
1 to 7 in the order.
When “Mail” is selected, the illumination for
i-mode mails and SMS is set.
Pattern
……
Selects the illumination lamp
flashing pattern from “Normal, Firefly, Flash,
Soft, Tempo, Melody linkage”.
Missed info
……
Sets whether to keep on
flashing the illumination lamp (5 seconds
interval) when a missed call or new mail
(i-mode mail, chat mail, Area Mail and SMS)
icon is displayed on the screen (The interval
of flashing becomes longer in Power saver
mode).
N
<Called>
z
When you receive the voice/videophone call
with Chaku-moji, the message appears in the
rear panel display (the message and receiving
display switches alternately). However, this
message does not appear if you set “Called” to
“OFF”.
N
z
If “Pattern 1 to 4” is set as the Ring tone, the
incoming call lamp flashes to the ring tone
regardless of the settings of this function.
z
If “Melody linkage” is set and no illumination
pattern is stored for melody linkage in the ring
tones, the “Normal” pattern is used for Chaku-
motion or Chaku-Uta-Full
®
.
z
When you receive the Area Mail, the
illumination lamp flashes in red regardless of
this setting.