Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 77 / 596

75
e03_dv55_7e.fm
[75/84]
Vo
ic
e/Vi
d
eop
ho
ne
C
al
ls
The FOMA terminal will not vibrate when i-mode mail, SMS, or
Message R/F is received even if the Vibration mode is set. Although
a ring tone does not sound, the message is received automatically,
and the received mail icon appears. When an Area Mail is received,
the dedicated alarm tone (beep sound), vibrator and called LED are
not activated.
When a data transmission is received, the vibrator, ring tone and
called LED are not activated.
An incoming PushTalk is automatically disconnected and
[Connection failed] appears on the caller’s display. The Driving
mode status can be notified to all connecting members if 3+ people
have participated.
If Location provision is set to [
許可
] for usage settings of each
service when location information provision, supported by GPS
function, is requested, a confirmation screen for location provision
is displayed, the GPS positioning screen appears, and the location
is provided after GPS positioning. However, Location provision/
accept, Location provision/notify, vibrator or called LED does not
operate. When Location provision is set to [
毎回確認
] for usage
settings of each service, location information is not provided.
For arrival call actions when the Public mode (Drive mode) and
various network services are set at the same time
n
“Arrival call
actions while the Public mode (Drive mode/Power OFF) and
various network services are set” on P. 76
The Public mode (Power OFF) is an automatic answering
service used to ensure manner in public places. Set the Public
mode (Power OFF) to play a message for the caller indicating
that the power is off and you are unable to speak (in a hospital,
airplane, train near the priority seats), and the call ends.
1
In stand-by, press
*25251 / s
.
The Public mode (Power OFF) is set (Nothing changes in stand-by).
When a call is received while the Public mode (Power OFF) is
set, a message indicating that the owner of the phone is currently
in a place that does not allow the mobile phone use is played.
Disabling the Public mode (Power OFF)
In stand-by, press
*25250 / s
.
• The Public mode (Power OFF) is disabled.
Checking the Public mode (Power OFF) setting
In stand-by, press
*25259 / s
.
• Check the current setting.
■
When the Public mode (Power OFF) is set
The Public mode (Power OFF) remains set until disabled. The setting is
not canceled when the power is just turned ON. The Public mode (Power
OFF) message is played when the handset is outside the service area or
in a place with no signal. When a call is received, a message indicating
that the owner of the phone is in a place that does not allow mobile phone
use is played and the call is disconnected. An incoming PushTalk is
automatically disconnected and [Connection failed] appears on the
caller’s display. Members are notified that the owner of the phone is not a
participant in the call when 3+ people have participated.
For arrival call actions when the Public mode (Power OFF) and
various network services are set at the same time, refer to “Arrival
call actions while the Public mode (Drive mode/Power OFF) and
various network services are set” below.
Note
Even if the alarm time arrives in the Public mode, the alarm does
not sound. The Called LED and vibrator are not activated.
Public mode (Power OFF)
Using the Public mode (Power OFF)
dv55_E.book 75 ページ ２００８年５月６日 火曜日 午前８時５９分