Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 133 / 596

131
e07_dv55_7e.fm
[131/142]
Security Settings
If the authentication is not successful, [Unable to authenticate.
Register symbol again if error continues] appears.
• To authenticate again: Select [Re-authenticate]
/
operate step
1 again.
• To enter the terminal security code: Select [Enter sec code]
/
enter the terminal security code
/ t
.
Touch the message display part to view the control key and
operate.
1
In the Custom menu, select [Settings]
/
[Security]
/
[UIM Settings]
/
enter the terminal
security code
/ t /
[PIN1 code input set].
2
Select the setting
/ t
.
3
Enter the PIN1 code
/ t
.
■
Entering the PIN1 code at power on
Set the PIN1 code input set to [ON], and the PIN1 code entry screen
appears when the power is turned on.
1
In the PIN1 code entry screen, enter the PIN1
code
/ t
.
When the PIN1 code input set is set to [OFF], the PIN1 code cannot
be changed.
1
In the Custom menu, select [Settings]
/
[Security]
/
[UIM Settings]
/
enter the terminal
security code
/ t
.
2
Select the PIN1 or PIN2 code
/ t
.
3
Enter the current PIN code
/ t
.
If the PIN1/PIN2 code is entered incorrectly, [PIN1/PIN2 code
not recognized] appears after step 4, and return to step 3.
4
Enter the new PIN code
/ t /
enter the new PIN
code again
/ t
.
Use the same steps to disable the PIN2 code lock.
1
In the PUK entry screen with PIN lock set, enter
PUK (eight digits)
/ t
.
2
Enter the new PIN1 code
/ t /
enter the new PIN1
code again
/ t
.
UIM Settings
Setting the PIN code
Setting the handset to require the PIN1 code
entry at power on
<PIN1 code input set>
Changing the PIN1/PIN2 code
<Change PIN1 code/PIN2 code>
Disabling the PIN lock
dv55_E.book 131 ページ ２００８年５月６日 火曜日 午前８時５９分