Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 136 / 596

134
e07_dv55_7e.fm
[134/142]
Security Settings
Disable all functions that require a signal.
The following functions are disabled.
1
In the Custom menu, select [Settings]
/
[Phone
settings]
/
[Self mode].
2
Select the setting
/ t /
[Yes].
When the Self mode is set,
]
disappears and
g
appears.
Restrict an access to mail and phonebook by a function to
prevent an access to personal information or unauthorized
editing.
The following items can be locked separately.
1
In the Custom menu, select [Settings]
/
[Security]
/
[Lock settings]
/
enter the terminal
security code
/ t /
[Function lock].
2
Select an item to lock/disable
t
(repeatable)
/ C
.
E
appears for locked items and
H
appears for disabled items.
When Function lock is set,
V
appears.
Self mode
Disabling online activity
Voice call Videophone PushTalk i-mode mail
SMS Message R/F i-mode iC transmission
Ir exchange Infrared remote control
Bluetooth function
Note
The Self mode is not available when in i-mode stand-by (
7
flashes).
While in the Self mode
Emergency numbers (110, 119, and 118) can be dialed while in
the Self mode. However, the Self mode is disabled after the call.
Message indicating the handset is turned off or in a place with no
signal is played to calls received. DoCoMo Voice Mail Service and
Call Forwarding Service are available.
Received i-mode mail and Message R/F are held at i-mode center
and SMS are held at SMS center. To receive, disable the Self
mode and perform Check new message or Check new SMS.
While in Self mode, Position location, Location notification and
Location provision in the GPS function cannot be used. In addition,
location service clients cannot be saved, edited or deleted.
Function lock
Hiding the phonebook and schedule
entries
i-mode/i-Channel i-
a
ppli Multimedia
Mail (including MessageR/F) Phonebook
Record message/Voice memo Memo/Schedule/Alarm
ToruCa GPS Chaku-moji
Note
Linked with the Function lock that is set from each function menu.
Ir exchange, iC transmission and Bluetooth communication for
items to which Function lock is applied cannot be received.
Data to which Function lock is applied cannot be backed up to the
microSD Card.
The terminal security code entry screen appears when some
functions under Function lock are attempted. When the terminal
security code is entered, Function lock is temporarily disabled.
Function lock cannot be applied to the Phonebook when Reject
unknown is set.
When Function lock is applied to i-mode/i-Channel
Each menu of i-mode (excluding Check new message) is not available.
dv55_E.book 134 ページ ２００８年５月６日 火曜日 午前８時５９分