Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 408 / 596

406
e18_dv55_7e.fm
[406/414]
Con
ven
ie
nt Fu
nc
tio
ns
Switch to receive a registration request/connection request from other
Bluetooth devices in stand-by display.
1
In the Custom menu, select [LifeKit]
/
[Bluetooth]
/
[Accept Registered].
In stand-by: Press
6
(for 1+ seconds).
L
flashes at approximately 1-second intervals.
Register devices within approximately 5 minutes after switching
the FOMA terminal to connection stand-by. After approximately
5 minutes,
H
becomes illuminating.
To select the service to switch to the connection stand-by:
Select [Accept Registered]
/ i /
select a service
t
(repeatable)
/ C
.
Turn off the Bluetooth power when disabling the stand-by status.
■
When accepting a registration request from the
unregistered Bluetooth device
1
Registration request from the other party in
stand-by
/
[Yes]
/
register.
For details on registering
n
step 4 of “Registering Bluetooth
device” on P. 404
Note
If a Bluetooth device is turned off during the connection or
disconnection processing or there is no response from the
Bluetooth device, it takes up to approximately 20 seconds for the
processing.
If the FOMA terminal is disconnected from a Bluetooth device
while being connected, the connected service is switched to
connection stand-by. Also, if the FOMA terminal is turned off while
being connected or in connection stand-by, the connection or
connected service will be switched to connection stand-by when
the power is turned on next time.
When connection to the registered Bluetooth device is failed,
delete the registration once and register the device again. It may
be able to connect.
Related Operations
Delete the registered Bluetooth device
<Delete>
In the device list screen, select a Bluetooth device
/ C /
[Delete]
/
[Yes].
Set a device that is automatically connected when a
Bluetooth compatible function is activated
<Def cnnctn dev>
In the device list screen, select a Bluetooth device
/ C /
[Def cnnctn dev]
/
select a service
t
(repeatable)
/ C
.
View detailed information of Bluetooth device
<Connection info>
In the device list screen, select a Bluetooth device
/ C /
[Connection info].
To edit the device name: Press
C /
edit the device name
/ t
.
• Enter up to 32 single-byte (16 double-byte) characters for a
device name.
Switching to the registration stand-by/connection
stand-by
<Accept Registered>
Note
Connection does not start when the other party’s Bluetooth device
finishes activating the connection and already in connection
stand-by. In this case, connect from the FOMA terminal.
If connection stand-by is set when multiple Bluetooth devices are
registered, the FOMA terminal may be connected to a Bluetooth
device other than the one to be connected.
While in connection stand-by, even if a connection request from a
Bluetooth device is received, connection may not be made
depending on the signal strength.
dv55_E.book 406 ページ ２００８年５月６日 火曜日 午前８時５９分