Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 293 / 596

e14_dv55_7e.fm
[291/300]
291
Continued on next page
1Seg
1
While watching 1Seg, press
$
.
To use mail function: Press
m
(for 1+ seconds).
2
Select a function
/ t
.
Setting the viewer position in Multi Window
The switching appli screen appears. Select and touch the function
to use and the following appear depending on the functions:
If a function that supports the full-screen is selected: The
selected function appears in full-screen.
If a function that does not support the full-screen is selected: The
selected function appears on the left side of the screen and the
1Seg watching screen appears on the right side of the screen.
Touch the display part in the 1Seg watching screen to display in
full-screen (When 1Seg ends, a substitute image appears at the
display position in the 1Seg watching screen).
When any of the following occur while watching 1Seg, Multi Window
appears for the normal position or 1Seg watching screen appears in
the right side for the viewer position, and the corresponding function is
activated. 1Seg sound is interrupted.
Use the Program guide i-
a
ppli to select a program and start
1Seg program. Also, set timer for starting or recording a
program.
For details on changing the Program guide i-
a
ppli
n
P. 233
1
In the Custom menu, select [1Seg]
/
[Program guide].
In the 1Seg watching screen: Press
C /
[Disp program guide].
• Alternatively, press
a
to activate the Program guide i-
a
ppli.
In the Program guide i-
a
ppli screen, press
i
to watch the
selected program.
Record movies of a program being displayed or a scene as a
still picture.
Recorded videos/still pictures are automatically assigned names,
as follows.
The videos/still pictures recorded to the FOMA terminal handset
are named according to the date and time of recording.
Example: End recording at 1:05 P.M. on July 22, 2008
b
[200807221305xxx] (“xxx” is a single-byte number)
Receiving calls while watching 1Seg
Incoming voice call/
Incoming PushTalk call
A call can be answered.
Return to the status existing before
receiving a call when a call is finished.
Incoming
Videophone call
A call can be answered.
1Seg is terminated when a call is answered.
Return to the status existing before
receiving a call when a call is rejected by
pressing
m
.
Alarm/Schedule
alarm
The details of alarm/schedule can be checked
when the alarm is stopped.
Return to the status existing before the
alarm was activated when an alarm is
finished.
Notification of
Reception/Recording
For details on the operation after the
notification of Reception/Recording
n
P. 294
Note
When talking in the viewer position, use the flat-plug earphone/
microphone with switch (sold separately).
After a call is ended, 1Seg may starts automatically. At this time,
the voice and sound are played in the volume for 1Seg. Keep the
FOMA terminal away from your ear.
Program guide
Using the Program guide i-
a
ppli
Note
The preset G-GUIDE program schedule remote control cannot be
used when 2in1 mode is set to [B mode].
Recording 1Seg
dv55_E.book 291 ページ ２００８年５月６日 火曜日 午前８時５９分