Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 42 / 596

40
e02_dv55_7e.fm
[40/58]
Before Using the Hands
et
■
Moving the pointer
In the Custom menu screen or while i-mode or
Full Browser is connected, move the pointer (
L
,
M
,
K
, etc.) up/down, left/right or diagonally to
select an item.
In some Custom menus, the pointer shape
varies or the pointer is not supported.
Move the pointer to the edge of the screen
while i-mode or Full Browser is connected to
show
G
,
R
/
\
,
Z
and scroll the screen to the
direction of the arrow. If Link is set,
M
appears,
and press
t
to move to the linked page.
The pointer moving speed varies depending
on the finger sliding speed.
■ Moving the cursor
In the Basic menu or Submenu, move the cursor
up/down and left/right in the same way as
w
of
Multi-guide key.
When there are multiple pages, move the
cursor to switch the pages.
■
Setting whether to use the Optical TOUCH
CRUISER
1
In the Custom menu, select [Settings]
/
[General
settings]
/
[TOUCH CRUISER set]
/
[Usage
settings].
2
Select the setting
/ t
.
■
Setting the pointer speed/scroll speed
1
In the Custom menu, select [Settings]
/
[General
settings]
/
[TOUCH CRUISER set].
2
Select an item
/ t
.
3
Select the speed
/ t
.
If the screen is switched from the normal position to the
viewer position, operate by putting your finger on the touch
panel (screen).
The operations differ depending on the function and screen in use.
When using the Optical TOUCH CRUISER
Do not operate the Optical TOUCH CRUISER using a pointed
metallic object such as a pen tip. May cause scratches or a failure
of the sensor.
Note that putting a sticker, etc. to the operating range may cause
a malfunction.
e.g.) Custom
menu screen
e.g.) Basic menu
screen
Setting the Optical TOUCH CRUISER
<TOUCH CRUISER set>
Touch panel
dv55_E.book 40 ページ ２００８年５月６日 火曜日 午前８時５９分