Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 557 / 596

8
Manual for PC connection setting_DV55.fm
J
Connecting the FOMA terminal to the
registered PC
1
In the Custom menu on the FOMA
terminal, select [Lifekit]
b
[Bluetooth]
b
[Accept Registered].
L
flashes at approximately 1-second intervals
on the FOMA terminal display.
2
Make a connection from the PC.
Automatically connect and
L
becomes flashing
at approximately 0.5-second intervals.
Before setting communication, confirm the name
and COM port number of the modem set for
connecting the dial-up service.
Operate the PC.
1
Click [
スタート
] (Start) menu
b
[
コン
トロールパネル ] (Control panel) and
click [ パフォーマンスとメンテナンス ]
(Performance and maintenance)
icon
b
[
システム
] (System) icon.
The system property screen appears.
For Windows Vista
Click [
スタート
] (Start) menu b [
コントロール
パネル
] (Control panel) and click [
パフォーマン
スとメンテナンス ] (Performance and
maintenance) icon
b
[ システム ] (System) icon.
For Windows 2000
Click [
スタート
] (Start) menu b [
設定
] (Settings)
b
[
コントロールパネル
] (Control panel) and
double-click [ システム ] (System) icon.
2
Click the [ ハードウェア ] (Hardware)
tab and then click [ デバイスマネー
ジャ
] (Device manager).
The device manager screen appears.
For Windows Vista
Click [ デバイスマネージャ ] (Device manager)
of [
タスク
] (Task).
3
Click each device, and then confirm
the modem name or COM port number.
Operate the FOMA terminal.
1
In the Custom menu, select [Lifekit]
b
[Bluetooth]
b
[List/cnnct/discnnct].
2
Select the Bluetooth device that is
connected, press
t
and select
[Yes].
The explanations in the subsequent steps are based
on the settings for Windows XP. The screens are
different for Windows Vista and Windows 2000.
Various network settings are required to connect
the FOMA terminal to a PC to perform packet
transmissions and 64K data communications.
Use the FOMA PC setup software to easily make
the following settings.
Easy settings
Follow the menu to easily create dial-up settings
for FOMA data transmissions and optimize the
transmission settings.
Transmission setting optimization
This optimizes the network settings in the PC
before using [FOMA packet transmission].
Optimize the transmission settings and fully utilize
the transmission performance.
Setting the Host (APN)
This configures the host (APN) required for
packet transmissions.
Unlike in the case of 64K data communications,
the host for FOMA packet transmissions does not
use a telephone number. A host name, called an
APN (Access Point Name), is registered to the
FOMA terminal for each host in advance. The
registration number (cid) of the APN is assigned
to the host telephone number field and a
connection is established. The APN
mopera.ne.jp is registered in the first cid (cid1)
and mopera.net is registered in the third cid
(cid3) at the time of purchase for connection to
mopera or mopera U. Configure a separate APN
to connect to another provider or a corporate
LAN.
cid [Context Identifier] ...
This number is a number for managing
hosts (APNs) used for packet transmission,
registered in the FOMA terminal. This is
configured when an APN is registered in
the FOMA terminal.
Confirming the modem
Stopping dial-up communication
service
Communication settings with
the FOMA PC setup software
FOMA PC setup software
Note
Alternatively, configure packet transmissions and
64K data communications without using the FOMA
PC setup software (
n
P. 19).
FOMA PC setup software of versions earlier than
4.0.0 (earlier version [FOMA PC
設定ソフト ] (FOMA
PC setup software)) supplied with a FOMA terminal
released before this handset are installed in the PC,
uninstall the earlier version [FOMA PC
設定ソフト ]
(FOMA PC setup software) in advance.
Manual for PC connection setting_DV55.fm 8 ページ ２００８年５月６日 火曜日 午前８時５５分