Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 59 / 596

e02_dv55_7e.fm
[57/58]
57
Continued on next page
Before Using the Hands
et
Set the date and time on the FOMA terminal. Set to
automatically correct the date and time.
1
In the Custom menu, select
[Settings]
/
[General settings]
/
[Date settings].
2
Select the [Auto time correction] field
/ t /
select
the setting.
Š Select [ON]
/ i
.
Š Select [OFF]
/
select the [Date] field
/ t /
enter the date
/
t /
select the [Time] field
/ t /
enter the time (24-hour
format)
/ t / i
.
When entering month, day and time, add 0 before numbers one
through nine (example: 01, 02, 03, etc.).
Date settings
Setting the date and time
Note
The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for
approximately a week or more or the battery remains empty, the
settings may be reset. When this happens, set again after
charging the battery.
If the date and time are not set correctly, the following functions
cannot be used properly.
Redial, Received calls Auto power ON/OFF
Alarm Schedule
SSL (authentication) i-
a
ppli Auto start
Starting i-
a
ppliDX Reception, Recording
Machi-chara
Record message (voice), Record message (Videophone calls)
Camera image titles/shooting date
Playback or view of i-motion/music data/e-comic with replay
restrictions
When Auto time correction is set to [ON]
The FOMA automatically adjusts the time by connecting to the
DoCoMo network’s time information.
When time difference is adjusted, [Time adjusted] appears. When
Auto time correction is set to [ON], the time is sometimes not
adjusted for a while. To activate Auto time correction, turn off
FOMA terminal power and restart.
Time is not adjusted depending on the signal status.
Time may be off by a few seconds.
When time difference is adjusted overseas, the local time and date
and
!
appear in Redial, Received calls, Received/Sent messages
history (SMS only), and Received/Sent messages list. The
received/sent messages are not displayed in order of the
displayed time and date but the mail reception/send.
!
does not appear in the Unsent messages for mail messages. If
the date order display is set for the Unsent messages, unsent
messages are displayed in the order of the displayed time and
date.
Time correction may not be performed depending on the overseas
network.
dv55_E.book 57 ページ ２００８年５月６日 火曜日 午前８時５９分