Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 132 / 596

130
e07_dv55_7e.fm
[130/142]
Security Settings
Handwrite characters and symbols on the touch panel to
perform the authentication. Handwriting can be used as a
secure security function instead of entering the terminal
security code. Compared to the terminal security code entry,
saved contents can be more flexible. However, since the
authentication is not performed with precise handwriting,
keep saved contents private.
Writing authentication is not completely accurate. DoCoMo shall not
be liable for damages stemming from a third person using this
product or if the product cannot be used because Writing
authentication does not recognize properly.
Save characters and symbols that are required for Writing authentication.
If Writing authentication is failed, the error dates and times are
recorded in Error history and can be checked. Up to nine of the
most recent errors are recorded.
1
In the Custom menu, select [Settings]
/
[Security]
/
[Writing authentic]
/
enter the terminal
security code
/ t /
[ON].
The operation is completed if [OFF] is selected.
2
Select [Agree]
/
[Register symbol]
/
[Agree].
To change the registered symbols for the authentication: Select
[Register symbol]
/
[Overwrite]
/
[Agree]
/
proceed to step 3.
To check the registered symbols for the authentication: Select
[Register symbol]
/
[Check saved data].
• To delete the registered symbols for the authentication: Press
i /
[Yes].
To check Error history: Select [Error history].
3
Handwrite characters/symbols on the text input
part
/ t
.
Handwrite characters and symbols to be used for the
authentication on the text input part.
Handwrite a character or symbol with 2 to 12 strokes.
Alternatively, divide them into multiple symbols to save.
To delete the registered characters/symbols: Press
c
.
Touch the message display part to view the control key and
operate.
Writing authentication can be saved in the viewer position.
4
Press
i /
[Agree].
Writing authentication can be activated in the viewer position.
1
In the Writing authentication screen, handwrite the
symbols saved for the authentication on the text
input part
/ t
.
Handwrite characters and symbols to be used for the
authentication on the text input part.
Handwrite in the same stroke order as when saving.
To switch to enter the terminal security code: Press
i
.
Writing authentic
Writing authentication
Setting Writing authentication
<Writing authentic>
Note
If the length of each stroke is insufficient, an accurate
authentication may not be performed.
Activating Writing authentication
Message display
part
Text input part
dv55_E.book 130 ページ ２００８年５月６日 火曜日 午前８時５９分