Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 423 / 596

421
e19_dv55_7e.fm
[421/424]
C
h
ar
ac
ter
E
ntr
y
Cut and copy up to 10,000 single-byte (5,000 double-byte)
characters at once.
1
In the text input screen, move the cursor to the
start point
/ C /
[Copy]/[Cut]
/ t
.
Alternatively, press
#
(for 1+ seconds) to cut.
2
Move the cursor to the end point
/ t
.
To move the cursor to the beginning of a sentence: Press
q
(for 1+ seconds).
To move the cursor to the end of a sentence: Press
r
(for 1+
seconds).
The highlighted text string is copied or cut.
1
In the message details screen, press
C /
[Move/
Copy]
/
[Copy].
2
Select an item to copy
/ t
.
The address is copied, and the operation ends.
3
Move the cursor to the start point
/ t
.
4
Move the cursor to the end point
/ t
.
1
In the text input screen, press
C /
[Paste].
2
Move the cursor to the paste location
/ t
.
Alternatively, press
*
(for 1+ seconds) in the text input screen
to paste.
Use four-digit kuten codes assigned to every single
character to enter kanji, hiragana, katakana, symbol, and
alphanumeric characters.
Refer to “Kuten code list” in PDF format in the accompanying
CD-ROM for details on Kuten code list.
1
Switch the input mode to the kuten code
(
n
P. 416).
2
Enter the kuten code.
After the fourth digit is entered, the character appears.
Copy text
Cutting/Copying/Pasting text
Copying/Cutting text
Copying the contents of mail, etc.
Pasting text
Note
Cannot paste to a screen in which the Submenu is not displayed.
The copied/cut text is discarded when the power is turned off.
In the fields that accept only single-byte characters such as the
“Reading” field in the phonebook, only single-byte characters in
memory are pasted. Depending on the location, only the allowed
number of characters is pasted.
Kuten code input
Inputting kuten code
dv55_E.book 421 ページ ２００８年５月６日 火曜日 午前８時５９分