Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 278 / 596

276
e13_dv55_7e.fm
[276/280]
GPS Fu
nc
tio
n
Set the host for the GPS service setting site.
※ Setting does not normally need to be changed.
1
In the Custom menu, select [LifeKit]
/
[GPS
menu]
/
[Loc. request menu]
/
[Host setting]
/
enter the terminal security code
/ t
.
2
Select [User specified host]
/ C
.
To return to the default host: Select [Default].
To change to the preset user-defined host: Select [User
specified host].
To delete to the set user-defined host: Select [User specified
host]
/ C / C /
[Yes].
3
Select [Host name]
/
enter the host name
/ t
.
Enter up to 99 single-byte alphanumeric characters and
symbols.
4
Select [Host URL]
/
enter the host URL
/ t
.
Enter up to 100 single-byte alphanumeric characters and
symbols.
5
Press
i
.
Configure the setting required for Location provision.
1
In the Custom menu, select [LifeKit]
/
[GPS
menu]
/
[Loc. request menu]
/
[Service settings].
Connected to the GPS service setting site.
2
Configure the settings.
Please contact GPS service providers for the setting details.
Location provision starts when the request to provide the location
information is received.
When each service usage setting is set to [
許可
], the location
information is automatically provided upon request.
When each service usage setting is set to [ 毎回確認 ], a
confirmation screen asking whether to provide appears at every
request. Select [Yes] to start providing the location information.
If no operation is performed when the location is requested, return
to stand-by display after providing location information is end, and
the stock icon
@
(Send loc - Resp/Send loc - No resp/Send loc -
Failed) appears. Select the stock icon and location histories appear.
To cancel Location provision, press
i
and press
t
. However, the
location information may be sent depending on timing.
Sent location information may not reach a requestor of the location
information depending on the signal strength.
Host ID for Location provision may not be displayed on the screen.
Setting host
<Host setting>
GPS service settings
<Service settings>
When the location information is requested
Note
When the 2in1 service is used, only Number A is available
regardless of the mode. If the location information provision is
requested with Number B, the location information is not provided,
and the failure of search is notified to the other party.
When the location information is requested from the other
party who used imadocokantan search
A confirmation screen for location provision appears at every
request. Select [Yes] to immediately notify to a rough positioning
result to the other party.
After [Yes] is selected, the GPS positioning screen appears, and a
high-accuracy positioning result is notified.
If the location provision is canceled after [Yes] is selected on a
confirmation screen for location provision, a rough positioning
result is notified to the other party. In this case, the location history
is recorded, but the location information does not appear.
dv55_E.book 276 ページ ２００８年５月６日 火曜日 午前８時５９分