Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 141 / 596

139
e07_dv55_7e.fm
[139/142]
Security Settings
When the other party has two or more phone numbers, saving is
required for each number.
1
In the Custom menu, select [Settings]
/
[Security]
/
[Accept/Reject calls]
/
enter the
terminal security code
/ t
.
2
Select an item
/ t /
[ON].
Set the handset to reject calls (including PushTalk) when
caller ID is not sent, depending on reason.
The following are the types of non-disclosure reason. For details
n
“Answering calls/Videophone calls” on P. 71
User unset Payphone Unavailable
Calls received from a caller who is set to be rejected due to a
non-disclosure reason will not be connected. Calls of other
non-disclosure reasons will be connected. Rejected callers hear a
busy signal. The stock icon
B
(missed call) appears, and the
reason of non-disclosure is recorded in Received calls.
It is recommended to also set the Caller ID Request Service.
Reject calls by reason of non-disclosure cannot be set for numbers
set to Accept calls.
Also when Reject unknown is set, Reject calls by reason of
non-disclosure is prioritized for calls without caller ID.
Reject calls by reason of non-disclosure is prioritized when set with
the Public mode (Drive mode).
1
In the Custom menu, select [Settings]
/
[Security]
/
[Accept/Reject calls]
/
enter the
terminal security code
/ t
.
2
Select a reason
/ t
.
3
Select the setting
/ t
.
Note
If an entry saved in Accept/Reject calls is edited/deleted in the
phonebook, the saved list content is also edited/deleted. However,
if Accept/Reject calls is enabled, entries cannot be edited/deleted
(except for Delete all in group/Delete all).
FOMA card phonebook numbers cannot be saved.
While the 2in1 is used, only phonebooks displayed in the mode
used can be saved and edited in the list.
Enabling Accept/Reject calls
Related Operations
Register from the phonebook
<Accept calls/Reject calls>
Select a name to be saved from the phonebook
/ C /
[Edit data]
/
[Accept/reject set]
/
select a registration
list
/ t /
enter the terminal security code
/ t /
select
the list number
/ t
.
Delete the phone number in the list
<Delete>
In the save list screen, select a name
/ t /
[Delete]
/
[Yes].
If all phone numbers saved in the list are deleted after Accept/
Reject calls is set to enable, the setting is disabled.
Change the phone number in the list
<Change>
In the save list screen, select a name
/ t /
[Change]
/
select the name
/ t
.
Check the registered other party’s phone number
In the save list screen, select a name
/ C
.
Reject calls by reason of non-disclosure
Rejecting calls with no caller ID
dv55_E.book 139 ページ ２００８年５月６日 火曜日 午前８時５９分