Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 563 / 596

14
Manual for PC connection setting_DV55.fm
8
Click [
はい
] (Yes).
9
Confirm the setting information and
click [
完了 ] (Finish).
The settings appear in a list. Check that the
settings are correct.
If [
デスクトップにダイヤルアップのショート
カットを作成する
] (Create dial-up shortcut on
desktop) is checked
E
, a shortcut is created
automatically.
To change the settings, click [
戻る ] (Back).
10
Click [OK] on the [ 完了 ] (Finish)
screen.
Restart the PC to enable the changes to the
settings. Click [
はい ] (Yes) when a message
appears prompting to restart the PC.
Sending and receiving transmissions (
n
P. 17)
J
Selecting packet transmission from
Easy settings (with other providers)
The setting is made for high-speed packet
transmissions at a maximum speed of 3.6 Mbps.
1
Follow steps 1 to 4 of “Selecting
packet transmission from Easy
settings (with mopera U or
mopera)” on P. 12.
Select [
その他
] (Other) for the host in step 3.
2
Enter the connection name and
click [
接続先 (APN) 設定 ] (Host
(APN) settings).
Enter a name in the [
接続名
] (Connection
name) field.
The following single-byte characters cannot be
entered.
¥ / :
＊ ? ! < > | ”
For Bluetooth connection, [
モデム名
] (Modem
name) field becomes the [(in-use
Bluetooth-linked standard modem)] or
[(Bluetooth modem provided by a Bluetooth
maker)].
Select whether to enable Notify caller ID when
dialing up. For details on the Notify caller ID setting,
follow instructions provided by your provider.
When using overseas, select [
設定しない
] (No)
for Notify caller ID.
Advanced settings (TCP/IP settings)
Click [ 詳細情報の設定 ] (Advanced) and the IP
Address/Name server setting screen appears.
To enter dial-up information, such as the
provider or corporate LAN, register the
necessary addresses according to the
instructions.
3
Configure the host (APN).
The default setting for the first cid is
mopera.ne.jp , the APN used to connect to
mopera. The default setting for the third cid is
mopera.net , the APN used to connect to
mopera U.
1
Click [ 追加 ] (Add).
The [ 接続先 (APN) の追加 ] (Add host (APN))
screen appears.
2
Properly enter the FOMA packet
transmission supported host name (APN)
for the provider in the [
接続先 (APN)] (Host
(APN)) field, and click [ OK] .
The [ 接続先 (APN) 設定 ] (Host (APN) settings)
screen reappears.
Enter only single-byte alphanumeric
characters, hyphen (-) or period (.) for [
接続
先 (APN)] (Host (APN)).
When using overseas, select [IP
接続
] (IP
connections).
※
Register up to ten cids.
4
Click [OK] on the [ 接続先 (APN) 設定 ]
(Host (APN) settings) screen.
The screen in step 2 reappears. The host
(APN) set in step 3 appears in [
接続先
(APN)
の
選択
] (Selected host (APN)).
5
Check the host name (APN) in the
[
接続先
(APN)
の選択
] (Selected host
(APN)) and click [ 次へ ] (Next).
Manual for PC connection setting_DV55.fm 14 ページ ２００８年５月６日 火曜日 午前８時５５分