Docomo FOMA SH906i, Инструкция по эксплуатации

Страница: 296 / 596

294
e14_dv55_7e.fm
[294/300]
1Seg
1
In the timer setting screen for starting/recording,
select [Start ann].
When setting timer for starting programs: Select [ON].
• If the start announcement is set to [OFF], the timer for starting
program is not activated.
When setting timer for recording programs: Proceed to step 3.
2
Select [Alarm time]
/
enter the alarm time (number
of minutes before the start time)
/ t
.
3
Select [Alarm tone]
/
select an alarm tone
/ i
.
To check an alarm tone: Select an alarm tone
/ t
.
To not sound an alarm: Select [Alarm tone]
/
[Not set].
4
Select [Alarm volume]
/
adjust the volume with
u / t
.
When the setting timer for recording programs: Proceed to step 6.
5
Select [Linked startup]
/
select the operation
performed after alarm.
6
Press
i
.
Set date/time and a channel and use 1Seg as alarm clock.
At a set start time, 1Seg is activated automatically.
For Wakeup TV, the off timer of [After 30 min] is automatically set.
1
In the Custom menu, select [LifeKit]
/
[Timer/
Alarm]
/
[Wakeup TV].
For details on the following operations
n
step 3 of “Setting
date/time and a channel” on P. 293
If start announcement is set to [OFF] and the linked startup
settings are changed, Wakeup TV is not activated.
An alarm, which set in start announcement, is activated approximately
1 minute before the set alarm time (for Reception) or the start time (for
Recording). After approximately 15 seconds, the alarm stops.
For details on stopping the alarm or adjusting the volume
n
“Key
operation when an alarm sounds” on P. 386
Operation after alarm
* 1Seg is muted.
Note
Multiple programs cannot be watched/recorded simultaneously. If
the recording period is partially same as that of an existing
timer-set program, the confirmation screen for saving appears.
Check the contents of the message, and then perform registration.
Setting Wakeup TV
<Wakeup TV>
Note
To edit or delete Wakeup TV, use Booking list in the 1Seg menu in the
same way as when setting a timer for starting or recording a program.
When the start time arrives
Timer
classes
Terminal status when
an alarm is activated
Operation after alarm
Reception Normal Complies with start announcement of
the Linked startup setting
For details
n
“Setting method to
start announcement” on P. 293
While watching
1Seg Nothing is performed (continue
watching 1Seg)
While watching
1Seg (different
channel from timer) Channel change confirmation screen
appears
/
[Yes]
/
channel change
Recording Normal 1Seg start
* /
recording start
While watching 1Seg Message display
/
recording start
While watching
1Seg (different
channel from timer) Message display
/
channel change
/
recording start
dv55_E.book 294 ページ ２００８年５月６日 火曜日 午前８時５９分