Docomo FOMA SA700IS, Руководство пользователя

Страница: 461 / 565

458
Dat
a
c
o
mmu
ni
ca
ti
on
1
Starting "
ハイパーターミナル
(Hyper
terminal)"
2
Set the notification of caller ID function
during packet communication to
"Activate" (186) or "Deactivate" (184).
Enter the setting in the format "AT
＊
DGPIR=<n>".
AT
＊
DGPIR=1
:
Add "184" to establish the dialup connection
(APN).
AT
＊
DGPIR=2
:
Add "186" to establish the dialup connection
(APN).
AT
＊
DGPIR=0
:
Returned to No set.
3
Confirm that "OK" is displayed and click
"
ファイル
(File)"
s
"
ハイパーターミナルの
終了
(End Hyper terminal)".
•
When ""XXX" と名前付けされた接続を保存し
ますか ? (Save the connection named "XXX"?)"
is displayed, click " いいえ (No)".
CallerID notification function by dialup network
settings
The dialup network settings can also be used to add
"186 (Activate)" or "184 (Deactivate)" to the dialup
connection number.
If "186 (Activate)" or "184 (Deactivate)" is set by both
the
＊
DGPIR command and dialup network settings,
the CallerID notification (Activate/Deactivate) is as
shown below.
Setting Dialup Network
Setting on Windows XP
1
Click "
スタート
(Start)"
s
Click "
すべてのプ
ログラム
(All programs)"
s
Click "
アクセサ
リ
(Accessories)"
s
Click "
通信
(Communication)"
s
Click "
新しい接続ウィ
ザード
(New connection wizard)".
" 新しい接続ウィザード (New Connection
Wizard)" screen is displayed.
2
Click "
次へ
(Next)".
3
Select "
インターネットに接続する
(Connect
to Internet)" and click "
次へ
(Next)".
4
Select "
接続を手動でセットアップする
(Set up
connection manually)" and click "
次へ
(Next)".
5
Select "
ダイヤルアップモデムを使用して接
続する
(Use dialup modem to connect)"
and click "
次へ
(Next)".
" デバイスの選択 (Device selection)" screen is
displayed if multiple modems are installed. This
screen is not displayed when only one modem is
installed, so proceed to Step 7.
6
Select "
モデム−
FOMA SA700iS (COMx)
(Modem: FOMA SA700iS (COMx))" and
click "
次へ
(Next)".
•
"x" of "COMx" differs depending on the port of
number (numeric) of your PC
7
Enter any connection name in "ISP
名
(ISP
name)" and click "
次へ
(Next)".
8
Enter the number of the dialup connection host
in "
電話番号
(Phone number)" with one-byte
(Half Mark) and click "
次へ
(Next)".
For packet communication
Enter ＊ 99 ＊＊＊＜ cid ＞＃ .
•
Enter the cid number, which is registered in " 接
続先 (APN) を設定する (Setting dialup
connection (APN))" into <cid>. Enter ＊99＊＊
＊ 3 ＃ to connect to mopera U, ＊ 99 ＊＊＊ 1
＃ to connect to mopera.
For 64K data communication
Enter the dialup connection number.
•
Enter
＊
8701 for using mopera U, and
＊
9601
for using mopera.
Dialup network setting
(when <cid>=1)
＊
DGPIR
Setting made
by command
CallerID
notification
＊ 99 ＊＊＊ 1#
No setting Activate
Deactivate Deactivate
Activate Activate
184 ＊ 99 ＊＊＊ 1#
No setting
Deactivate
* 1
Deactivate
Activate
186 ＊ 99 ＊＊＊ 1#
No setting
Activate
* 2
Deactivate
Activate
* 1 CallerID notification setting of dialup network
(184) has a priority.
* 2 CallerID notification setting of dialup network
(186) has a priority.