Docomo FOMA SA700IS, Руководство пользователя

Страница: 467 / 565

464
Dat
a
c
o
mmu
ni
ca
ti
on
AT ＊ DANTE Indicates FOMA
terminal reception
level with a number. When executing "AT ＊ DANTE"
" ＊ DANTE : <n> " shows the level in
the "DANTE : <n>" format.
n=0 :
(Out of service area)
n=1 :
n=2 :
n=3 :
AT ＊ DANTE
＊ DANTE: 3
OK
AT
＊ DANTE=?
＊ DANTE:(0-3)
OK
(Shows the range of
values that can be
displayed.)
AT ＊ DGANSM=<n> Sets the reject/permit
setting mode for
incoming packet
communications. The
setting made by this
command is only valid for
the packet
communication received
immediately after the
command is entered.
* 2
n=0: Reject setting =OFF/Accept
setting = OFF (default)
n=1: Reject setting=ON/Accept
setting=OFF
n=2: Reject setting=OFF/Accept
setting=ON AT ＊ DGANSM=0
OK
AT ＊ DGANSM?
＊ DGANSM:0
OK
AT ＊ DGPIR=<n> The setting made by
this command is valid
when a communication
is sent or received.
The dialup network
settings can also be
used to append "186
(Activate)" or "184
(Deactivate)" to the
dialup connection
number.
* 2
n=0 : When packet communication
connection is being established,
connects to APN directly (default).
n=1 : When packet communication connection
is being established, send "184" to APN.
n=2 : When packet communication connection
is being established, send "186" to APN.
When "186" (Activate)/"184"
(Deactivate) is specified by both the
command and dialup network. P458
AT ＊ DGPIR=0
OK
AT ＊ DGPIR?
＊
DGPIR: 0
OK
AT ＊ DRPW Indicates an index for
the reception power of
the radio signals
received by FOMA
terminal.
Setting "AT ＊ DRPW" shows the power
in the "
＊
DRPW:<n>" format.
AT ＊ DRPW
＊
DRPW:0
OK
AT ＊ DRPW=?
＊ DRPW:(0-75)
OK
(Shows the range of
values that can be
displayed.)
ccc
This command switches
the FOMA terminal's mode
from online data mode to
online command mode.
The escape guard interval
is " second" (fixed value).
AT
c
CEER Displays reason for
disconnection of
immediately preceding
communication.
See "Disconnection reason display"
P472
AT
c
CEER
c
CEER:36
OK
AT
c
CGDCONT Sets dialup connection
(APN) when sending
packet
communication.
* 2
See "Supplement to AT command"
P472
See "Supplement to
AT command" P472
AT command Overview Parameters/Description Command examples