Docomo FOMA SA700IS, Руководство пользователя, Страница: 460 / 565

457
Dat
a
c
o
mmu
ni
ca
ti
on
2
Click "
スタート
(Start)"
s
Click "
すべてのプ
ログラム
(All Programs)"
s
Click "
アクセサ
リ
(Accessories)"
s
Click "
通信
(Communication)"
s
Click "
ハイパーターミ
ナル
(Hyper terminal)".
•
Then double-click "Hypertrm.exe" on Windows 98.
•
When an OS other than Windows XP is used,
" すべてのプログラム (All programs)" is
displayed for " プログラム (Programs)".
3
Enter the desired dialup connection name
in "
名前
(Name)" and click "OK".
•
When the message " 規定の Telnet プログラム
に設定しますか？ (Set to the default Telnet
program?)" is displayed after executing Hyper
terminal, the setting is an optional. Contact to
PC manufacturers or Microsoft Corporation
about setting information.
4
Enter a temporary phone number (such as
0) for "
電話番号
(Phone number)" and,
select "FOMA SA700iS " from "
接続方法
(Connection procedure)" and click "OK".
•
Area code is not required to set. (The above setting
does not depend on dialup connection (APN) setup.)
5
When the connection screen is displayed,
click "
キャンセル
(Cancel)".
6
Enter the dialup connection (APN) and press .
Enter the setting in the format "AT
c
CGDCONT
=<cid>, "PPP", "APN"".
•
Note that cid settings are overwritten if the cid
has been already set.
<cid>
:Enter any number between 2, 4 to 16.
"PPP"
:Enter "PPP".
"APN"
:Enter the dialup connection (APN) in
" " (double quotation marks).
If "OK" is displayed, the dialup connection (APN)
setup is completed.
7
Confirm that "OK" is displayed and click
"
ファイル
(File)"
s
"
ハイパーターミナルの
終了
(End Hyper terminal)".
•
When ""XXX" と名前付けされた接続を保存し
ますか ? (Save the connection named "XXX"?)"
is displayed, click " いいえ (No)".
The dialup connection (APN) and cid
(registration number)
Dialup connection (APN) setup is the same
manner as adding the other party's phone number
to the Phonebook. The differences between
dialup connection setup and FOMA terminal
phonebook is as shown below:
INFORMATION
Making CallerID notification setting
CallerID notification can be set for packet
communication. Take care to send your caller ID that is
important information.
•
Setting Show CallerID is required for using mopera
U or mopera.
Resetting dialup connections (APN)
AT
c
CGDCONT=
:
Reset all cids.
•
The settings are restored to the default
setting for <cid>= 1 (mopera.ne.jp) only,
<cid>=3 for "mopera.net" and other settings
for <cid> = 2, 4 to 16 are cleared.
AT
c
CGDCONT= <cid>
:
Reset specified cid.
Checking dialup connections (APN)
AT
c
CGDCONT?
:
When nothing is displayed even if AT
command is entered
ATE1
Dialup connection
settings FOMA terminal phonebook
entries
cid (registration number) Registration (Phonebook number)
APN Party's phone number
•
For dialup connections (APN) other than mopera U/
mopera, contact the provider or company network
administrator.
•
The registered cid becomes the dialup connection
number.
Default No setting
See next page